Yarisworld Archive

FRONT ABS

2 posts · 6,342 views

htschekOriginal postUnited States · Aug 5, 2013#1
Hi All,
The help I received thus far lurking has been much appreciated.

I bought a 2007 Yaris Sedan. Got a good deal knowing it needed some TLC including ABS fixes. First thing I did after reading here thoroughly was pull back wheels, carefully remove harnesses from ABS sensors and they were all full of crap and corroded with green crap. So I replaced the harnesses and the sensors/hubs.

I jumped pins 4 and 13 on the OBDII port and along with codes for the rear wheel sensors, there are codes 33 and 34 which I believe correspond to the fronts as well.

I haven't seen much here on the fronts so can anyone fill me in on the likely issue or point me to a thread I might have missed.

(By the way, I live in VT so leaving the ABS go isn't an option. If the car has ABS, it has to work to pass inspection.)

Thanks for the help already.
Henry

Replies 1

CTScottUSA, CT · Aug 5, 2013#2
33 and 34 are both rears. 31 and 32 would be the fronts.