Yarisworld Archive

Why won't my dipstick come out???

7 posts 路 4,787 views

caineroadOriginal postToronto 路 May 23, 2013#1
I just did oil change today, but the dipstick wouldnt come out no matter how hard i pulled it, I tried twisting it but i worried it would break, but still couldnt get it out.

What's going on with it?

Thanks

Replies 6

bronsinnj 路 May 23, 2013#2
Same thing happened with my wifes 04 Camry. I believe that was because being a new car I almost never checked the oil between changes and the o ring got dirty.

I just yanked harder and it came out ok. 馃 I cleaned the end of the dipstick with some gas on a rag and all was well.

You might benefit from heating the end of the metal dipstick tube with a hair dryer. Obviously if you heat it too much that wouldnt be good! 馃槩

OR

Squirt a little gas where the dipstick/dipstick tube come together to disolve the crud that has most likely built up in there. It might take a few treatments.

Wait a minute.

It wasnt my wifes 04 Camry it was my daughters 2012 Camry. The car was new and the first time I checked the oil (my daughter never checks her oil or tire pressure) the dipstick was difficult to remove. After I cleaned it it was OK.
caineroadThread starterToronto 路 May 23, 2013#3
thanks, followed your advice, and got it back out!
bronsinnj 路 May 24, 2013#4
Awesome! 馃
peewee1New York 路 May 24, 2013#5
my dipstick got stuck on my honeymoon night, but I got it out...
SeptembersrainSan Antonio 路 May 24, 2013#6
鈫戔啈鈫戔啈 *Snorts* Didn't have enough lube? LOL
peewee1New York 路 May 25, 2013#7
We had to use a sears pry-bar !!!!!!!