Yarisworld Archive

Rods and Piston Question

8 posts 路 3,044 views

YodaOriginal postFL 路 Apr 23, 2013#1
I have cp piston and wanted to know.. what side does those little eye brows on top should be facing. The exhaust side or intake side. The same question for the Bearing Tangs.
Help馃榿

Replies 7

GolddeenohColumbia, SC 路 Apr 23, 2013#2
isn't the intake valve larger than the exhaust meaning that it stands the highest chance of kissing the pistons, so I would assume that they should be on the intake side unless for some reason toyota makes their exhaust valves receive more open than the intake, but normally speaking it would be the intake side.
YodaThread starterFL 路 Apr 23, 2013#3
Yea i am not too sure I might have to pull out the manual...If I can remember where I put the darn thing.
YodaThread starterFL 路 Apr 23, 2013#4
Ok so for the Pistons they face on the Intake side. No info on the Bearing Tangs tho.
GolddeenohColumbia, SC 路 Apr 23, 2013#5
should be a dot, arrow, or something designating the direction to aim the piston to the front of the engine.
kounj 路 Apr 23, 2013#6
Looks like the exhaust side in the Toyota manual.
YodaThread starterFL 路 Apr 23, 2013#7
Thx it is the exhaust side for the Tangs. Time to slap this thing together.
scioncrewHB 路 Apr 23, 2013#8
Bearing Tangs face to the exhaust side
piston to valve relieves face to the intake side