Crazy ButcherOriginal postEmptyHell(mtl) 路 Feb 27, 2013#1So here guys,After a year daily driving my yaris,i wasnt 100% happy with the OEM seats so i bought some DC2 Recaro seats off a Integra Type R, they offer better supports and thats exactly what i was going for.
At first when i bought them they we're pretty dirty, no rips no burns but dirty, So i used a mix of Zero for delicate material and water,Heres a picture of when i got em
Picture not included in this copy
So once they we're cleaned up, only got the driver side on picture
Picture not included in this copy
So i removed the Passenger seat, yeah i know its pretty messy,I'll clean it up when springs comes
Picture not included in this copy
Then i took the stock seat rail
Picture not included in this copy
I had one of my friend who works at a metal/welding shop fab this metal plates for me, the rails bolt on it then the plates bolt on to the seats
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
So now ive ran into a problem, while taking off the passenger seat everything went so well, on the other hand the driver side had already a torx bolt stripped, and i stripped another one, so.. I'll need to wait until i can get my hands on the right tools to get over this problem.
So at the moment im still riding with only one front seat, the oem one 馃槩
I think the red DC2 will go good with my Konig Britelight reds, Oh and also i got some Tanabe Sustec to install too 馃
Picture not included in this copy
Replies 22
Kaotic LazagnaCentral Valley, CA 路 Feb 27, 2013#2Nice. I'd like some black Recaro seats for mine. Take some pics once everything is installed.
Kaotic LazagnaCentral Valley, CA 路 Feb 27, 2013#3You can also try to find regular bolts that will fit that thread pitch. Just take one of those torx bolts to Home Depot (or any other hardware store), and go to the hardware section. Find their bolt thread pitch testing panel, and see which pitch it is. Then simply find and buy some replacement bolts of the size you want to use.
Crazy ButcherThread starterEmptyHell(mtl) 路 Feb 27, 2013#4@Kaotic For sure ill take some pics when they are in, i asked one of my friend to help me get the stripped torx out but we have to wait next week.Once they are out i'll buy some better bolts for the seats because the Torx are a PITA.Around here theres alot of JDM shops who sell any kind of seats, The black recaros goes for around 800$ a pair.
Kaotic LazagnaCentral Valley, CA 路 Feb 27, 2013#5I hate how seats are so expensive. lol. You can get a stripped/rounded bolt removal kit. ;)
Crazy ButcherThread starterEmptyHell(mtl) 路 Feb 27, 2013#6Yes indeed the are expensive, but in my case, its worth every penny, At the moment they are used as Xbox gaming seats lol but once they will be in the car its gonna be waaay more worth it.
vtencolumbus 路 Feb 27, 2013#7Good choice on the seats ! I'm using them as well :)
DeathBeardLos Angeles, CA 路 Mar 1, 2013#8awesomeness馃憤
Crazy ButcherThread starterEmptyHell(mtl) 路 Mar 6, 2013#9So Heres an update guys, Installed the passenger side seat, and they are LOW as hell, since im 5'7" i am going to need to put spacers on the rear of the seats :P Sadly the driver side will not be installed soon. Tomorrow i have to meet up with one of my friend who as the right tools to pull out the stripped Torxs.
On to the pics!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Crazy ButcherThread starterEmptyHell(mtl) 路 Mar 9, 2013#10So guys as promised Pics of both seats in
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
KensMalta 路 Mar 9, 2013#11Beautiful mate. I would suggest making something else red though as at the moment it kinda hurts your eyes looking at it. I would suggest changing the door fabric to red and the centre console?
B2FiNiTYUS 路 Mar 14, 2013#12so nice!!
1.5Tampa 路 Mar 14, 2013#13Damn this gives me ideas lol DC2 recaros are a dime a dozen by me
SilverSquash!South Africa 路 Mar 14, 2013#14Looks Wicked! got any full view pics of the car with the seats and red wheels on?
Crazy ButcherThread starterEmptyHell(mtl) 路 Mar 15, 2013#15Thanks alot guys for the great comments! I like them alot, I would never go back to stock now that i have these :P
@ 1.5 If you can get your hands on some, Do It! you wont regret for sure!IMO its a huge improvement over stock.
@SilverSquash! Unfortunately i dont, where i live we have laws about when you can remove your winter tires. so i wont have pics until then, but i will surely take some when the time comes.
vtencolumbus 路 Mar 16, 2013#16U just need to buy the airbag module from ctscott about $50 ... N u r good to go .... I'm selling my recaros actually , and comes with the module ... Check the FS section
Sorry for the thread jacking :)
Crazy ButcherThread starterEmptyHell(mtl) 路 Mar 17, 2013#17No problem vten, and also TPA5 or anyone if you get vten's seats you get the rail with them (correct me vten if im wrong) So you wont have to get the rails of the oem seats, which is quite a b**ch, Also, 800$ for seats,rails and the module is really a good deal, i paid the pair 700$, had to fu*k up my oem seats to get the rails, had to get some plates fabbed up too.
I LOVE my recaros
mr_milesPortland, OR 路 Mar 17, 2013#18Oh crap, I thought the stock seat rails were welded to the seats! Looks like I've got a project to do....
vtencolumbus 路 Mar 17, 2013#19thanks butcher,
yup, mine comes with the wedge engineering brackets with the adjustable heights.
if they don't sale, itll ended up on my new ride or office :P
Crazy ButcherThread starterEmptyHell(mtl) 路 Mar 17, 2013#20@Mr Miles No they are not welded they are held on by some torx bolt, let me see if i can snap some pics to show what im talking about.
Well After further investigation, Theres a part thats welded or something and cannot be removed
Picture not included in this copy
So the part that is welded is in the yellow circle. it goes from one side to the other on the driver side seat.
You need to remove the torx bolt in the red circles to get the L bracket off,on the other side i left the L bracket on but just removed the bolts that we're in the Bright green circles
Picture not included in this copy
Heres a view of the driver side seat L bracket, this one as stated higher is not removable
Here's the passenger side, the L bracket is removable on this side, but where the torx bolt are, is not.
Picture not included in this copy
Another view from under the passenger side
Picture not included in this copy
Picture not included in this copy
So after a while of figuring out where the screws are and plastic clips on the trim panels heres the result
Hope it helps, ill get the size of the torx male socket i used to get the bolts out.The male socket size is a T40.
banifestoOver there 路 Mar 18, 2013#21After swapping the seats, will the seatbelt & sensor work? looks like there is a wiring loom under the stock seat.
Crazy ButcherThread starterEmptyHell(mtl) 路 Mar 19, 2013#22@ Banifesto To get that problem resolved, you have to buy a module Sensor bypasser, you can check it out on Microimage's site, it just plugs in your black box under the passenger seat,when you remove the oem seat you have to unplug a connector off of the black box to get the seat out. just plug the new module right there, then you can switch it on and off. Also the modules are made by CTScott, Shoutout to him by the way!
banifestoOver there 路 Mar 19, 2013#23Thanks for the info Crazy Butcher :)