Yarisworld Archive

Removal of the door panel

6 posts · 5,173 views

GolddeenohOriginal postColumbia, SC · Feb 21, 2013#1
There is a rattling noise coming from my drivers side door every time I close the door or hit a bump. does anyone have a diagram or set of instructions for removing the door panel?

Replies 5

CTScottUSA, CT · Feb 21, 2013#2
There's a thread in the DIY section called something like "30 second door panel removal".
GolddeenohThread starterColumbia, SC · Feb 24, 2013#4
well i fixed the rattle in the door, apparently this bracket had come lose where it has foam gluing it to the outside door panel.

i put a few dabs of super glue on the foam and pushed it back where it was, and for added redneck assurance, some duct tape.
inside door resize1.jpgremovedpanel boxed.jpgducktaped inside door.jpg
CTScottUSA, CT · Feb 24, 2013#5
Superglue is only for non-porous materials. I would use Automotive Goop instead, which will do a good job of bonding it back in place.
GolddeenohThread starterColumbia, SC · Feb 24, 2013#6
its was dry rotted looking and torn, the duct tap should hold it together. since my budget for repairs right now is 0 i will have to stick with what i did instead of acquiring something else. thanks for the info :D