Yarisworld Archive

Muffler rattle noise

6 posts · 4,111 views

cougar65Original postSanta Cruz · Oct 20, 2012#1
So, I have had my axle back in for some time now and ever since I've installed it at certain rpms it woud make a rattleing noise. It is NOT my heat shield. Sound almost sounds like rocks in my muffler, Im certain its not my catalitic converter sence i have no CEL.
Could it be the gasket? I reused it instead of buying a new one. Gas escaping and making that aweful noise? I have shaken the muffler to try to hear if anying is oose inside and i dont hear anything. It like to make the noise when its waremed up and ussually under a load.

Replies 5

Bluevitz-rsOshawa, Ontario, Canada · Oct 20, 2012#2
did you assemble the spring bolts properly when you clamped it back together?
cougar65Thread starterSanta Cruz · Oct 20, 2012#3
so, if i didnt it could make the noise?, ill take it appart and put it back togeter then.
Bluevitz-rsOshawa, Ontario, Canada · Oct 20, 2012#4
yeah if the bolts aren't bottomed out or the spring shifted while you tightening it up. Or it could just be a bad weld that broke loose and makes noise at it's resonance frequency of whatever RPM you hear it.
MUSKOKA800Chatham, Ontario, Canada · Oct 21, 2012#5
Or it could have a loose baffle inside the can itself (corroded or broken weld).
My TRD axleback may have that same issue. 80,000 kilometers of service through four years. I guess it won't last forever.
cougar65Thread starterSanta Cruz · Oct 24, 2012#6
***Fixed**** Was the jasma stamp that was rattleing... took it off and now its rattle free.