junorico24Original postSydney · Jul 18, 2012#1I can do oil change/ fliter etc.
Guyz,u have info on wheel bearings, brake pad replacements, transmission and brake oil change plus the cv axle and joints.
Anyone attempted these?
Replies 2
LuxMarkham, Ontario, Canada · Jul 18, 2012#2Yes, I've done them all.
No, they are not something you should do at home, except brake pads. By the way, rotors must always be changed with pads; I've seen rotors shatter like glass ornaments because the owner thought he could save money by doing just a pad slap.
Rear wheel bearings are detatchable hub assemblies that require a slide hammer to pull out. Front wheel bearings are press-in only, unless you buy a complete steering knuckle with bearing and hub already pressed in ($600+).
CV axle boots are not worth your time. Take it to a professional. Complete axles are doable if you have the 30 mm 12-point impact socket and impact wrench. You'll also need to detach the outer tie rod from the knuckle. You will lose transmission fluid in the process.
Gearboxes are drain & fill. Automatic transmission uses lifetime filter.
junorico24Thread starterSydney · Jul 19, 2012#3Thanks, mate.
It's not for the faint of heart. I just need some info Preferably a tutorial of sort.Not actually going to give it a go.Be good to get an idea where the bolts and what steps to take etc. Can you do a transmission fluid change to synthetic at home?