Hello there Y-W members,
I Need your Help and Support to figure a way to install my rear coilovers, need
a way to fix it Because of clearance Issue between the back wheels & tires.
Apexi Coilovers SV Damper
I just buy a JDM Apexi Full Coilovers for my Echo but i have to modifie the rear
Coilovers to fit it in my TOYOTA Echo NCP12.
Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy
The Measurements Tall 19 inch, centimeters 48.3 , mm 482, 0.4826 meter.
Need to Measure the diameter to.
For the space issue need to think for for the best solutions.
Picture not included in this copy
Thinking of doing this and i have some other plans to i will update this thread later on.
To make a fully welded brackets actually are stout and help prevent the springs from binding under hard side loads when cornering.
Picture not included in this copyPicture not included in this copyPicture not included in this copy
or an adjustable bracket like the on below pic.
Picture not included in this copy
----------------------------------------------------------------------------------------------------
HYPER-FLEX Bushings
Energy Suspension Parts as fallow, I have them @ home & i need to get the rest parts in order to complete my full Suspension HYPER-FLEX Bushings leave you the pics.
Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy
Parts I Need to get:
Whiteline (W53299) Control arm - lower inner rear bushing.
Picture not included in this copy
link @ amazon site below.
http://www.amazon.com/BUSH-KIT-CONTR...+rear+bushing.
INSTALL GUIDE
http://www.whiteline.com.au/docs/ins...ides/Z5118.pdf
Ingalls Engineering 81260 Caster/Camber Adjusting Kit
Fitment Notes: FRONT - REPLACES 14MM STRUT MOUNTING BOLTS +/- 2 DEG
Picture not included in this copy
The idea
Picture not included in this copy
Link Below,
http://www.amazon.com/Ingalls-Engine...ype=automotive
Need To modified the Lower Ball Joint & Front Outer Tie Rod End Bushing for the Maximum Driving Cornering Stability, so I think keeping the OEM Ball Joint & Front Outer Tie Rod and just change the Tie Rod / Ball Joint Dust Boots, So i need to do some Measurements to replace the OEM Dust Boots rubbers with a Dust Boots Made of HYPER-FLEX™ Performance Polyurethane from Energy-Suspension.
Picture not included in this copy
Picture not included in this copy
Link For Universal Tie Rod / Ball Joint Dust Boots
http://www.energysuspensionparts.com...Dust-Boots.asp
Feel Free guys to give fresh idea,
Thank in Advance
I Need your Help and Support to figure a way to install my rear coilovers, need
a way to fix it Because of clearance Issue between the back wheels & tires.
Apexi Coilovers SV Damper
I just buy a JDM Apexi Full Coilovers for my Echo but i have to modifie the rear
Coilovers to fit it in my TOYOTA Echo NCP12.
Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy
The Measurements Tall 19 inch, centimeters 48.3 , mm 482, 0.4826 meter.
Need to Measure the diameter to.
For the space issue need to think for for the best solutions.
Picture not included in this copy
Thinking of doing this and i have some other plans to i will update this thread later on.
To make a fully welded brackets actually are stout and help prevent the springs from binding under hard side loads when cornering.
Picture not included in this copyPicture not included in this copyPicture not included in this copy
or an adjustable bracket like the on below pic.
Picture not included in this copy
----------------------------------------------------------------------------------------------------
HYPER-FLEX Bushings
Energy Suspension Parts as fallow, I have them @ home & i need to get the rest parts in order to complete my full Suspension HYPER-FLEX Bushings leave you the pics.
Picture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copyPicture not included in this copy
Parts I Need to get:
Whiteline (W53299) Control arm - lower inner rear bushing.
Picture not included in this copy
link @ amazon site below.
http://www.amazon.com/BUSH-KIT-CONTR...+rear+bushing.
INSTALL GUIDE
http://www.whiteline.com.au/docs/ins...ides/Z5118.pdf
Ingalls Engineering 81260 Caster/Camber Adjusting Kit
Fitment Notes: FRONT - REPLACES 14MM STRUT MOUNTING BOLTS +/- 2 DEG
Picture not included in this copy
The idea
Picture not included in this copy
Link Below,
http://www.amazon.com/Ingalls-Engine...ype=automotive
Need To modified the Lower Ball Joint & Front Outer Tie Rod End Bushing for the Maximum Driving Cornering Stability, so I think keeping the OEM Ball Joint & Front Outer Tie Rod and just change the Tie Rod / Ball Joint Dust Boots, So i need to do some Measurements to replace the OEM Dust Boots rubbers with a Dust Boots Made of HYPER-FLEX™ Performance Polyurethane from Energy-Suspension.
Picture not included in this copy
Picture not included in this copy
Link For Universal Tie Rod / Ball Joint Dust Boots
http://www.energysuspensionparts.com...Dust-Boots.asp
Feel Free guys to give fresh idea,
Thank in Advance
13 attachments not included in this copy