Yarisworld Archive

extra speakers ?

21 posts · 6,486 views

yariSB86Original postOH · Jun 14, 2012#1
i have some questions about our factory stereo:

1. can the head unit support 2 extra speakers?
2. can i just splice my extra speakers into the currently wired rear speakers?
3. will i need more power? i.e. an amp?

my friend gave me his old 6x9s that he never used. each speaker is built into its own box. id like to leave the speakers in the boxes, if at all possible. i just dont know how to install them.

Replies 20

yariSB86Thread starterOH · Jun 14, 2012#2
some photos of the speakers and where i would like to install them.

3 attachments not included in this copy

09sedantoronto · Jun 14, 2012#3
You can.

A) get an aftermarket headunit, install a 4 channel amp, and power those speakers
B) unplug the rear speakers and solder extension speaker wire and run them to the speakers.

Option a will benefit you alot more cuz it will leave you room to upgrade your front speakers with components and hook up a subwoofer if you want extra bass, but it will involve more money since you need to invest in electrical sytem (wiring, new battery, possibly alternator if you want big power) option b is alot cheaper but severely limits you in terms of upgrade options,
G-AmmoThe Netherlands · Jun 14, 2012#4
Nice! I maybe wanna do this too :D Maybe ill try to put speakers in the original spots or in the trunk :)
_S7V7N_South Texas · Jun 14, 2012#5
Pull up Google and look up Impedance before you begin hooking up speakers.
sqcompBack at home · Jun 15, 2012#6
IIRC, all the stock speakers are 4 Ohm.

If you are going to use an amplifier, look for one that has high level inputs. Those will make your life easier (or should) if keeping the stock radio. You can also look at a processor or more affordably a good quality LOC. I put an MTX REq in my wife's Tacoma years ago and it still works very well.
_S7V7N_South Texas · Jun 15, 2012#7
Hookin up speakers will knock down the load. Unless it works diff on a headunit. I've never seen a headunit rated at 2 ohms.
sqcompBack at home · Jun 16, 2012#8
^ Agreed.

...but...but...whwatdyamean I can't hook up my HU into a 1/2 Ohm load? My friend did...and he made 237 dB from his 6x9s!

*barf*
yariSB86Thread starterOH · Jun 16, 2012#9
Thanks everyone for the input. I went to BestBuy today and picked up the following:
New HeadUnit
http://www.bestbuy.com/site/JVC+-+50...=1218447374174

Replacement front door speakers
http://www.bestbuy.com/site/Pioneer+...&skuId=3438938

I'm going to uninstall the two factory rear 5.25s and install those previously mentioned 6x9s. Where and how I'm going to mount these boxes is yet to be found 😕 hopefully when I remove all the trim Ill find a nice spot to secure them. I'm going to get started with removing all the trim and getting everything setup for tomorrow. Ill do a semi DIY and post pics tomorrow when everything is said and done. Wish me well m8s 🍻
yariSB86Thread starterOH · Jun 16, 2012#10
6x9s are wired up and sound great. time for the replacement front door speakers and head unit! 👍
_S7V7N_South Texas · Jun 17, 2012#11
Originally Posted by TOLMACH ↑
^ Sorry man, I like neither the speakers that you bought nor the head unit (( I suspect the OEM stuff is way better ((
Whenever you criticize somebody like that how about going into detail. If not you just come off as a troll.


YarisB. Keep doing your thing man. Everybody is going to have an opinion. Hopefully with reasons.
_S7V7N_South Texas · Jun 17, 2012#12
Yaris B. We usually ask for a bit of info.

Like :

Is this your first install.
Are you looking for Sound Quality or Just louder than stock.
A budget.

You also want to do some research online.
Keywords.

Ohms / Impedance / Load
RMS / Watts
Signal clipping / Distortion

You're not going to understand everything but it's basic knowledge.

So please do some research. From there we can build a foundation and help you a bit more.

So do some homework and report back on Monday !
_S7V7N_South Texas · Jun 17, 2012#13
Originally Posted by TOLMACH ↑
Am I criticizing anybody?

Stock front speakers are very good in terms of sq, nice flat response throughout the whole range, awesome low end response, high sensitivity (lightweight cone with small air gap). Overall very solid design with superb cast frame.

Same with stock headunit - nice SQ, decent internal amps

.. (sorry for bringing bad news)

Just my 0.02
Now this opinion is somewhat more useful. You put the reason why you don't like the equipment.
yariSB86Thread starterOH · Jun 17, 2012#14
i wanted to upgrade sq with a real tight budget. hence everything being on the cheaper side. its not awesome but its better than stock setup imo. everything installed just fine and sounds great. i feel that the new headunit does not supply enough power so i might invest in an amp, funds permitting. as for Tolmach, everyone is entitled to his/her opinion. yours just happened to be on the negative side. doesnt bother me, im still going to do what i want to do. thanks for all the advice S7V7N.
sqcompBack at home · Jun 17, 2012#15
I'll fall in line with what S7v7N is saying. Yeah, the equipment isn't the best in the world. We've got to start somewhere though.

I recall my first system. It was in a Geo Metro. A Coustic tape player, a small 25 x 4 Blaupunkt amplifier and a single MTX Blue Thunder subwoofer.

...those were the days...

Now it's travelling all over the country, going to CES, INAC and SBN and competing in sound quality competitions.

Point is, don't let anyone's opinion drag you down. Do what you need to do...and learn something. The latter is a must.
yariSB86Thread starterOH · Jun 18, 2012#16
I like that idea. I'll see what I can do. Thanks man.
yariSB86Thread starterOH · Jun 19, 2012#17
I used a wiring diagram from modifiedlife.com
yariSB86Thread starterOH · Jun 20, 2012#18
So I ported my 6x9 boxes with a 2inch hole saw. Allows for better movement of air. Sounds a lot better. Also went back to bestbuy today. Got an amplifier and also upgraded my 6x9s. In the process of wiring everything up today. I should have pics up later tonight.
razingmanthe hammer · Jun 23, 2012#19
It all depends on if you can hear good quality or not. If you can, don't even buy those as they are bad and you need 200+ speakers to actually have good quality. but if you can't hear good, then 30 buck ones will sound good enough
yariSB86Thread starterOH · Jun 25, 2012#20
so here is an update to what i've been doing. i wired the door 6.5s and my rear 6x9s. tuned the amp. everything sounded great. then i came across a set of 8" subs with component mids and tweeters. they are already in separate boxes. they are rather large so im in the process of figuring out where to mount everything. 600w amp powering everything. with what i've been reading, if i "combine" the left front 6.5 and left rear 6x9 into channel 1, the right front 6.5 and the rear right 6x9 into channel 2, that leaves channels 3 and 4 for my new to me 8" component setup.

-side note; has anyone put tweeters in the C pillars? or anywhere else like that?

@ razingman - my $40 pioneer 6.5s sound amazing. the pioneer 6x9s sound great too when i take them out of those shitty walmart brand boxes i happened to have gotten for free.
BEEFnorth carolina · Jun 25, 2012#21
make sure the amp can handle the load you are thinking about putting on it. if they are 4 ohm speakers, you are talking about applying either a 2 or 8 ohm load on the front channels of your amp (depending on how you are going to wire it). I think most amps that are bridgable can handle individual 2 ohm loads.

I miss the good old days when rockford fosgates were quarter ohm stable...