Yarisworld Archive

thoughts for yaris parts

53 posts · 26,391 views · page 2 of 2

Replies continued

turboyarisThread starterSouthern New Jersey · Apr 19, 2007#51
its the diameter of the stem of the valve the long straight part, ours are around 4.8. The main reason to upgrade the valve is yes ability to withstand higher heat, more pressure (under boost), it also can lighten the valvetrain and that coupled with springs and all can allow for a higher redline. and yes both exhaust and intake valve stems are around the 4.8mm mark.
turboyarisThread starterSouthern New Jersey · Apr 20, 2007#52
so i came up with another idea for a part i will soon begin to develop.... an electric water pump.... what do you guys think? how many of you guys would be interested? another cool mod i was considering just to give you guys some other modding ideas, is the auto radiator comes with a tranny cooler built in, you could modify this to hook up an engine oil cooler to it, which is a very helpful setup, in colder conditions it brings oil temps up quicker and in hotter conditions it would obviously keep oil temps down which in turn keeps the whole temp of the engine down as well. Not sure if the brackets would match up or not, not to familiar with the differences of the rad just knew the auto had the built in cooler, or so the factory service manual says.
cali yarisCanoga Park, CA · Jun 18, 2007#53
Great read.... but I'd just like a nice polished aluminum battery box that fits perfectly?