Just a heads up for those of us that cannibalized the stock speakers and used them as mounting adapters. I thought that I did a good job of aligning the speakers with the door panels so that the circular ring behind the grill opening fit to the speaker correctly. As it turns out, the speaker is still too far forward and the surround was making contact with on of the ribs that go across the grill opening. This may not happen to everyone who does this - it could depend on the speaker manufacturer. I just wanted to let you guys know that it happened to me.
Using stock speaker as adapter
4 posts · 4,826 views
Replies 3
You talking about the front or rear?
If you have a US sedan, I would not use the door speaker as a mounting bracket, they are far to flimsy.
If you dont have the cash to go buy a $10 set of adapter rings, then root around for some old 6.5" speaker grills you may have lying around. If you do, trim them up and use them as your spacer.
If you dont have the cash to go buy a $10 set of adapter rings, then root around for some old 6.5" speaker grills you may have lying around. If you do, trim them up and use them as your spacer.
I didn't have a problem, but some speakers could require you to trim those ribs or the round piece on the inside of the door panel