Yarisworld Archive

Question about switch sizes

9 posts 路 4,509 views

ChinoCharlesOriginal postOH 路 Mar 16, 2007#1
So I recently installed a power window kit in my Yar, and I already had the cold cathodes, so I have three switches sitting in three of the holes provided right underneath the parking brake.

Problem is none of them fit the holes. I have one circular switch with a blue LED and two rectangular switches that are too large for the holes they're sitting in... not the cleanest look in the world. 馃ぎ

Anyone know where I can find a couple four-prong rocker switches for my windows and one three-prong regular ol' switch for my cathodes that fit those stock slots? How are switches sized and what switch would fit in the Yar?

Any help is greatly appreciated!

Replies 8

Chris07LBNew Jersey 路 Mar 16, 2007#2
Call sparks, and order up the fog light switch. The printed on fog symbol can be removed easily.
Black YarisToledo, OH 路 Mar 16, 2007#4
I am sure we can find something on summit on Sunday, I will clean ya up
ChinoCharlesThread starterOH 路 Mar 16, 2007#5
Maybe. I need to know if there is a freeking format to how they label switches by size! What am I looking for, there are a gajillion sizes.
Black YarisToledo, OH 路 Mar 16, 2007#6
I will take a look at it, they are usually sized by the diameter of the base... I will take a look and figure something out...... Oh yeah did you see this ?
Shifter I designed
ViolinNew Jersey 路 Mar 17, 2007#7
I can tell you that the standard Toyota dash fog light switch won't fit. I could get the part # if that helps you.
ChinoCharlesThread starterOH 路 Mar 17, 2007#8
I'm just going to take the little pop-out bezel with the switch slots into the store. They may know.
jdubau55Blacksburg, VA 路 Mar 17, 2007#9
Digikey has the measurements in the catalog....Give them a call and tell them what you want and what size and stuff. Digikey rules.