Yarisworld Archive

Roof drip molding

7 posts · 12,961 views

patmOriginal postboston · May 17, 2012#1
Has anyone replaced the Roof drip molding on a 2007 Yaris along with the clips.

My left is gone ???? The right one looked like a mcdonalds arch - U upside down. I flatenned the right one.

It's only a piece of rubber

PatM

Replies 6

CTScottUSA, CT · May 17, 2012#2
I haven't replaced one, but have pulled a set off.

For the sedan you can probably reuse the clips, but just in case, the part number for them is 75561-52040. The garnish itself is 75552-52140 (Left side) and 75551-52160 (right side). The clips are about $3 each and the molding is about $30 per side.
Klink10910 · May 18, 2012#3
Thank you for that info CT.
patmThread starterboston · May 19, 2012#4
thanks, will order from trd as i found dealership is expensive they wanted around $50 for rubber and 2 clips. ordering is still cheaper with s/h.
andreas14cyprus · Jan 11, 2017#5
HELLO ...I LOST MINE FROM BOTH SIDES..IS IT SO NECESSARY TO INSTALL THEM?AFTER A BIT A HAVE LICK FROM BOTH FROND UPPER ROOF CORNER...IS THAT THE REASON OR HAPPEN BECAUSE OF SOMETHING ELSE
SirDigbyDenver, Colorado · Jan 11, 2017#6
why are you yelling?
dogsridewithUSAnotCA · Jan 11, 2017#7
Those grooves with loose rubber inserts look like rust generators to me. I'm considering replacement from 295 ml tube of "Locktite PLS30 Sealant Roof and Flashing" black polyurethane caulk.