Yarisworld Archive

anyone with blitz super and CAI AEM help please

5 posts · 3,611 views

vtenOriginal postcolumbus · May 9, 2012#1
im having a problem with my supercharger install on the idling ...trying to source the problem....my installer cut off a piece of my AEM CAI ...to fit onto the blitz ...since it's from the xb ...

would this be the culprit ??

on idling , it seems like my car doesnt have enough air for the engine and died on every stops ...


per my aem manual ...that spout is suppose to go to the crank case breather hose

help guys

1 attachment not included in this copy

Replies 4

CTScottUSA, CT · May 9, 2012#2
As long as he plugged the nipple on the crank case you are OK with that bypassed (it is really an emissions thing).

The idling issue when running a F/IC is typically caused by having too short of an injector response time (which is a parameter in the F/IC system settings).
SchizopreniaSurabaya, Indonesia · May 9, 2012#3
i think you are facing problems with diameter of the intake piping, would the XB be different? the yaris MAF sensor will sit only on 2.25" pipe, centered at the manner of the stock airbox position of the sensor. if XB uses a 2.5" pipe intake, dont think it would work...
vtenThread startercolumbus · May 9, 2012#4
I have pictures for all the hoses .... I'll post it once I get home ...
Quite irritated at this moment ...
vtenThread startercolumbus · May 10, 2012#5
here's the hoses pics

6 attachments not included in this copy