Yarisworld Archive

O2 sensor not mounting into DC headers!

7 posts · 4,310 views

thatbryanguyOriginal postSC · Mar 17, 2012#1
So I've purchased some DC headers and the Flange is in the way of the O2 sensor. The mounting hole for the sensor is at an angle going towards the flange. Unfortunately unless I want to cross the threads the is no way it seems to get the O2 sensor to go straight in. Anyone else experience this problem?

Replies 6

goliath1812Ocala Florida · Mar 17, 2012#2
I think there was a report of a similar problem on here, the fix was the gasket. Did you take the gasket off the old manifold and put it on the DC header?
thatbryanguyThread starterSC · Mar 17, 2012#3
Yea I put the old donut gasket
thatbryanguyThread starterSC · Mar 17, 2012#4
On but the problem isn't the bolt clearance, it's the O2 sensor screw hole is actually angled down towards the flange instead of straight out...I'm try
thatbryanguyThread starterSC · Mar 17, 2012#5
To get sOme pics up soon. Sorry iPod keeps hitting done and post quick reply on accident
yariseggvvtiCali · Apr 8, 2012#7
i got in to the same problem. The shop kill my o2 sensor. I am awaiting new o2 sensor and cost me 249 for the sensor. How to fix this problem? Cut the screw shorter or bent the o2 sensor little bit? Thanks!