Yarisworld Archive

Need to change '07 sdn's battery but strut bar covers it

5 posts · 3,582 views

homerjOriginal post? · Jan 18, 2012#1
Greetings. My vehicle is an '07 Sedan. I might need to change my battery this weekend but it isn't so straight forward because I have a strut bar (TRD) covering it. Obviously I would like to avoid taking off and putting back on the strut bar. Does anyone have any recommendations that might help me? How have strut bar owners changed their battery? any wiggle room? ... Thanks!

Replies 4

CTScottUSA, CT · Jan 18, 2012#2
Removing the intake air box will allow you to slide the battery forward. If you try that, cover one of the battery terminals (with electrical tape, etc) before sliding it to prevent shorting it to the strut bar.
homerjThread starter? · Jan 31, 2012#3
Update: The battery comes out by moving it side to side. Unscrewing the clamps from the battery terminals takes a little care. This information might be useful to others.
CTScottUSA, CT · Feb 11, 2012#4
Originally Posted by MickZEL ↑
Hi all .Tell me what is the capacity of the battery 07 sedan?
The stock battery is 45 Amp Hour.
SplitEdmonton · Feb 27, 2012#5
wife's yaris wouldn't start this morning and i have the exact same issue with the strut bar. what's the best battery i can fit in it? I'm not concerned about price or weight, just the most cold cranking amps possible. If i recall correctly, last year i tried an optima red top and it didnt fit properly.