Yarisworld Archive

My carbon fiber grille, custom

11 posts 路 4,321 views

alias06Original postMN 路 Dec 1, 2011#1
I know that most of you guys will probably bash me on coolant temp, but living in MN and having about 4 months of snow, and city driving my car really doesn't get that hot. Just wanted to post that up front. 馃憤

Picture not included in this copy

Picture not included in this copy

Replies 10

CrankyOldManWest Michigan 路 Dec 1, 2011#2
Any chance you could post up how you put it together? I may just do something like this for the winter.
alias06Thread starterMN 路 Dec 2, 2011#3
All I did for making was basic. I used the original grille from the yaris and then put a layer of carbon on top of it.

Picture not included in this copy

After that layer cured, I put three more layers on top, only utilizing four layers, total but that is up to you.
Picture not included in this copy

I tried vacuum bagging it to get a nice surface finish but the grille was flattened due to too much vacuum. So it didn't quite work out.
Picture not included in this copy

After that it is just a lot of sanding it down to make it look nice. Good luck with it if you decide to make one
Klink10910 路 Dec 2, 2011#4
No bashing here. Gotta do what you gotta do. I like the idea and with the lower opening not blocked I think everything will be okay.
cali yarisCanoga Park, CA 路 Dec 2, 2011#5
A scan gauge would tell you if your intake temps or water temps rise. You could always open some holes if needed. Good job!

I bet you get 1-2 mpg gain out of this.
matthewaiunited states 路 Dec 2, 2011#6
yeah i was gonna say looks great but maybe cut a few holes
KCALB SIRAYVirginia 路 Dec 2, 2011#7
Astechically, it's not an eye sore and serves a purpose. I love the CF, but personally would love to see it color matched and the elimination of the cross hairs on the lower grill to make IT stand out a bit more. It would look a bit more OEM that way IMO. Very nice job!
alias06Thread starterMN 路 Dec 2, 2011#8
Thanks for the positive comments. I was thinking about badging the grille with either a RS emblem or TRD. Not sure which one I want to do with yet, maybe both. was also thinking about doing a color match with red/carbon fiber. Possibly a CF hood and CF wing in the future, never know.
Jason@SportsCarDebary, FL 路 Dec 2, 2011#9
We are considering something similar on our car, although the rules require the block-off be done on the backside to maintain stock appearance. I think the car has plenty of grill area, and this should really clean up the air at the front of the hood.

I will be interested to hear how it works out temp wise for you.
cali yarisCanoga Park, CA 路 Dec 2, 2011#10
I have a huge radiator, I bet I could do it too. 馃憤
rufnnekriyadh, Saudi arabia 路 Dec 3, 2011#11
two thumbs up dude.
did you check the temp rise inside the engine bay?
if you did can post the readings? ambient temp around your yaris and the engine bay temp...thanks.