Yarisworld Archive

Anybody used this double-din fascia?

7 posts · 4,907 views

Replies 6

minkenSweden · Nov 6, 2011#2
I bought that from dynamics sound and its NOT CT24TY22! The hole for the stereo is 180mm wide, and does not work with Metra kit. (wich is 200mm wide)

And the quality was really crap!.. I ended up buying the Toyota genuin part and use the who back sidebrackets from dynamicsound.

I contacted dynamicsounds and they were total jerks, and didn't want to help!
YuryThread starterCanada · Nov 6, 2011#3
My goal is not to use any kits, but have a standard narrower opening. I have an aftermarket double din stereo with a Scorche side panels sitting in the factory fascia. If I had the fascia that is 180 wide than my radio would fit without side panels.
No need for brackets for a double din unit...the factory ones work fine.

can you elaborate on bad quality?
minkenSweden · Nov 6, 2011#4
I see. It would fit then, but the quality is really poor. All the edges are very rough. How it would look mounted, I dont know..
YuryThread starterCanada · Nov 6, 2011#5
^ thanks, sounds like I should leave it as is. which isn't really that bad.

Is my understanding correct - toyota doesn't make double din fascias for a liftback?
YuryThread starterCanada · Nov 6, 2011#7
Thank you.