Yarisworld Archive

Exhaust Port Size

5 posts 路 8,446 views

ChinGyOriginal postLondon 路 Aug 16, 2011#1
Hello

I'm new to the forum. First time posting. Long time reader. I have a UK 1NZ-FE Yaris T Sport. I'm looking to have a custom exhaust header (manifold as we call it in UK) made up with longer runners to hopefully gain more power out of the engine. I currently have an OBX header which has been running fine for years, but I just want more out of the car.

Does anyone know what the exhaust port size are? The fabricator is currently making the head flange and wants to know the measurements so that they could make the runner's diametre slightly bigger, and not too big.

Replies 4

cali yarisCanoga Park, CA 路 Aug 16, 2011#2
Welcome to the forums. 馃檪

That's the 1.8L right? Do you still have your stock header?
ChinGyThread starterLondon 路 Aug 16, 2011#3
It's a 1.5L, NCP13.
I do have the stock header. It looks about 1.25" (31mm).
The gasket bore size is about 41mm (just over 1.5")
Which is rather odd as that would mean the runners are smaller than the ports.
Shouldn't it be the other way around? With the exhaust ports being smaller than the runners.
malibuguyWestminster, MD 路 Aug 16, 2011#4
Smaller runners reach peak velocity sooner building torque
ChinGyThread starterLondon 路 Aug 16, 2011#5
Great fact. But it would be nice if the runners were slightly wider than the port to stop reversion.
If anyone has a cylinder head out. Could you please confirm the exhaust port size?