Yarisworld Archive

installing rear mud guards - question

11 posts · 10,343 views

dmfangOriginal postCalifornia · Aug 11, 2011#1
I just got some mudguards from trdsparks for fang. The front ones were a piece of cake, but I had a question about installing the rear ones. Do you have to take the wheel off to put the mudguards on?
Thanks!

Replies 10

CTScottUSA, CT · Aug 11, 2011#2
Yes. You have to drill holes in the rear bumper to mount them. Here's the install guide.

1 attachment not included in this copy

Z00KAPort Isabel, Texas · Aug 11, 2011#3
Yup, I got the same ones and decided to put on the rears when I rotate the tires at the end of this month.
KitelessUnion City, CA - U.S.A. · Aug 11, 2011#4
Would love to see pics after you get everything installed.

- Jason
kimonaHuntington Bch, CA · Aug 11, 2011#5
No need to remove the wheels. Rather than drilling the holes, use a soldering iron with a bent tip. It makes for a very quick and clean installation.
dmfangThread starterCalifornia · Aug 11, 2011#6
Yes. You have to drill holes in the rear bumper to mount them. Here's the install guide.
yeah, it does look like it might be easier with them off :-(
looks like a job for the weekend instead of lunch hour

No need to remove the wheels. Rather than drilling the holes, use a soldering iron with a bent tip. It makes for a very quick and clean installation.
brilliant! New plan for lunch hour: hitting the Lowe's
dmfangThread starterCalifornia · Aug 13, 2011#7
what the hell, San Fernando Valley? Did everyone read kimona's post and rush out to buy bent tips for soldering irons?

At any rate, going to do my best to install tomorrow. I'll post some pics when i'm done
kimonaHuntington Bch, CA · Aug 13, 2011#8
You can easily bend a cheapy copper tip to do the job successfully.

1 attachment not included in this copy

dmfangThread starterCalifornia · Aug 14, 2011#9
its done! I did end up taking the wheels off in order to be able to put on the mudguards. Even with the soldering tip, I couldn't figure out how to get a screwdriver in the small space.
All in all the rear guards took me about an hour. I live in an apartment and had to move my car to work on each side. I also installed one incorrectly and had to take the wheel back off to fix it. (There are two parts to the clip that needed to be removed - i had only pulled one)

*disclaimer: my camera is broken, so all I have is a mobile for pictures. if you have a problem with quality - tough, its all i got*

drilling holes, while using the guard as a template
Picture not included in this copy

screws tightened inside the wheel well
Picture not included in this copy

strange gap on the bottom inside (oops) - this is the one I had to go back and correct
Picture not included in this copy

nice and flush against the body
Picture not included in this copy

I think it definitely improves the look of the rear
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
kimonaHuntington Bch, CA · Aug 14, 2011#10
You needed a stubby screwdriver. Nevertheless, you got it done. Nice work!
dmfangThread starterCalifornia · Aug 14, 2011#11
thanks! and thank you for your help

yeah, my tool inventory is severely lacking - i blame apartment living. a 4-in-1 screw driver and a leatherman that usually cover what I need to do.