Yarisworld Archive

Yaris tachometer programmable

7 posts · 5,845 views

Replies 6

ricepowerSaudi Arabia · Jul 23, 2011#2
wow
cali yarisCanoga Park, CA · Jul 23, 2011#3
pretty cool, did I see it jump to 6600+ on acceleration? At 0:32.

The rev limit is 6250, so you might want to take a look into that.
mazillaSan Jacinto California · Jul 23, 2011#4
Tag
why?harnett county NC · Jul 23, 2011#5
it is nice, but as was noted in the vid, it is a tad off on the high side. And maybe it is percentage wise, because 6600 rpms woulda prolly damaged a stock engine.
metalsharkThread starterMesa, AZ · Jul 27, 2011#6
I checked the tire size and gearing specs. Calculator says I'd be at 6,330 RPM at 65 mph in third gear. I'll reprogram my calibration constants today. I also need to add a method to flash the display above 6000 rpm. On the earlier BS2 bar graph tach I used the flashing display but that was in pBasic instead of Spin.
My next goal is to enable and calibrate the speedometer readout. Then when I go to a bigger tire size I can easily re-calibrate it myself against the GPS.
cali yarisCanoga Park, CA · Jul 27, 2011#7
Calculator says I'd be at 6,330 RPM at 65 mph in third gear.
Maybe if there weren't a rev limiter set to 6250.