djgab101Original postaustralia · Apr 7, 2011#1Hey guys i brought these head lights and got them installed they look awesome but i am having trouble adjusting the head lights up and down!
does anyone know how i can move the head lights down cause my lights are too high!
1 attachment not included in this copy
Replies 11
KlumzyeeSoCal · Apr 7, 2011#2post a higher res picture.. of the back side
boggydeeCalgary · Apr 7, 2011#3is that for 09 yaris? can you tell me where you got them?
thebarberGrand Rapids, MI · Apr 7, 2011#4there are adjustment screws at the back of projector...you need to seat the headlights w/o screwing them in, see where the beam hits a wall (at dusk) and then pull out the headlights to adjust them and reseat them.
djgab101Thread starteraustralia · Apr 9, 2011#5Thanks guys I finally got them working :)
They are for a 09 Yaris hatch I got them off eBay for 300 Aussie dollars they look great :)
djgab101Thread starteraustralia · Apr 9, 2011#6Now that I have got them working I am trying to make my halo lights with the three LEDs come on when I open the car with the remote! I tried hooking up the dome light to the halo lights and the three LEDs but it won't work I need to find another way to make it work
Does anyone of a circuit board or DIY or method to get this working i am running out of ideas
Betriventedmonton · Apr 9, 2011#7You need to hook up the dome light signal to a relay.. if you try tio just draw power fom the dome light it won'tbe enough I don't think. So you'd need a line from battery > relay > halos
djgab101Thread starteraustralia · Apr 10, 2011#8Thanks for ur response if I got power from the dome to the relay to the haloes u reckon it would work? I am gonna have to shop around and look for a relay I am sure eBay or the shops have some
marcustoronto, canada · Apr 10, 2011#9love those lights..
Betriventedmonton · Apr 10, 2011#10Well it's just a hunch, because however little power LEDs draw when you're trying to light up THAT many lights from one source I don't think there's enough power. You can do a test like hooking up the LED's right to your battery and seeing if they light. And then hooking up only one set to the Dome circuit and seeing if they light.
marcustoronto, canada · Apr 10, 2011#11itll work i have 10 hi leds tapped on my turn signal with no issues. i believe u only need 1 watt to run it.
djgab101Thread starteraustralia · Apr 10, 2011#12U guys are legends I think it should work from the dome light i gonna draw power from their I am gonna have to get a relay tho to see if it would work :)