Yarisworld Archive

axle back problems?? wont bolt down firmly

6 posts · 3,368 views

YarisaurOriginal postFlorida · Apr 1, 2011#1
just installed a DCsport axle back exhaust and the joint were it bolts up is loose..( i can move it around and the bolts are tight.. is it suppose to have play in it like this because its gasketless??

Replies 5

auxmikeLI, New Yawk · Apr 1, 2011#2
You'll know if you can hear or feel an exhaust leak.
YarisaurThread starterFlorida · Apr 1, 2011#3
Okay about to go for a drive and I will get under there and see if i can feel a leak..
YarisaurThread starterFlorida · Apr 1, 2011#4
Okay just checked it an it is leaking a little.. what do i do? everything is tight..
shinleeaustin tx · Apr 1, 2011#5
I would go back and just unbolt and rebolt it back up, taking extra care that it's aligned right before you do the rebolting
R2D2ME · Apr 1, 2011#6
Do have the donut gasket in there Yarisaur? There should be a round polymer gasket that fits in the joint and gets sandwiched between the flanges under spring tension when the bolts are tight.

R2