Yarisworld Archive

Mtx-THdome-axials Front speaker upgrade

4 posts · 4,622 views

Yaris_ThatOriginal postCanada, Ottawa. · Feb 18, 2011#1
Check this out guys,
DSC00685.jpgDSC00683.jpgDSC00679.jpgDSC00689.jpgDSC00692.jpgDSC00691.jpg

Replies 3

auxmikeLI, New Yawk · Feb 19, 2011#2
That's real clean!
I wish I'd done something like that.
I used the adapters that Crutchfield gives away with a speaker purchase...
big loLoiza,Puerto Rico · Feb 19, 2011#3
Nice choice in speakers, good job
Yaris_ThatThread starterCanada, Ottawa. · Feb 20, 2011#4
Update I got the rear speakers in as well yesterday. I did not need to modify or make any spacers or adapters. Was able to drill new holes to screw speakers in. I remove the foam ring from the stock speakers and fitted it around the back side of the thunder - domes so that there would be no metal to metal contact. So I now have 6.5 inch speakers all around and dame they hit much harder than the stock crappy speakers. I also installed a Clarion CZ500 deck with integrated blue-tooth... what a treat ! In the spring I will be amplifying the thunder - dome - axials at 70W rms x 4. For bass a single 12" mtx subwoofer pushing 400W RMS . Should be some killer sound !