Yarisworld Archive

HIDs

7 posts 路 2,761 views

RnankooOriginal postNew Jersey 路 Dec 17, 2010#1
ran into a little problem... Im not to sure where to connect this wire thats in my hand i think it goes to the battery but idk 馃し Picture not included in this copy

Replies 6

RnankooThread starterNew Jersey 路 Dec 17, 2010#2
there for the head lights H4 also the h11 has the same ones also
severous01SE Texas 路 Dec 17, 2010#3
you should have a bulb adapter harness...unless you bought a cheap kit...or you can make a harness/relay setup and run power/ground to the unit. or, you can use the headlight harness adapter to power the unit but it's not as reliable.

dont mix up power ground or you could chance blowing the unit. you can use the headlight harness to power the relay and run the relay directly to the unit....is how i'd do it.
RnankooThread starterNew Jersey 路 Dec 18, 2010#4
thanks for the reply馃i got it from garm so u know its good stuff 馃憤 the only thing is is that the h11 hid fogs didnt come with a relay cord or anything im not sure if there supposed to but im gonna shoot a email to garm
severous01SE Texas 路 Dec 18, 2010#5
nah. you plug the factory harness in there if it fits. otherwise you'll need a harness adapter.
RnankooThread starterNew Jersey 路 Dec 18, 2010#6
i think its supposed to go into a relay and connect to the battery it has a + and a - symbol on the other side
RnankooThread starterNew Jersey 路 Dec 18, 2010#7
did anyone get the hid kit for the fogs from garm i check to see if it was in the DIY section but it wasnt