Yarisworld Archive

trd vitz rs exhaust question

5 posts 路 4,014 views

uncleyarisOriginal postToronto 路 Nov 12, 2010#1
Can anyone with this exhaust confirm the proper hanger required as to not melt my bumper.

馃し

A big thanks ahead of time.

Replies 4

KioshiFremont, CA 路 Nov 12, 2010#2
It won't melt your bumper...echo and Astroman, i believe had this type of exhaust...not able to buy in north america from dealerships now....
WeeYariGeorgetown, Ontario, Canada 路 Nov 13, 2010#3
There should really be no clearance issues. Even if it does happen to be too close, you can just go out to a muffler shop and get a longer rubber hanger. If you've found a good deal, grab it. You've been jonesing far too long for this exhaust.
echo_hrsTop Gear Test Track 路 Nov 14, 2010#4
You will need a longer rear hangar (~+1cm), as it is very close to the stock bumper because it was designed for the JDM RS bumper with the cutout in it...Any mufller shop should be able to dig one up; or Crappy Tire etc...

Cheers
uncleyarisThread starterToronto 路 Dec 2, 2010#5
Thanks all