Yarisworld Archive

DIY Ebay Projector Fog Lights?

5 posts · 6,962 views

Replies 4

advocateThread starterlocation · Oct 30, 2010#2
sounds like I need to cut up the wiring harness on the engine bay side. there's a lot of wiring going on there. there's definitely a relay as well.

other fogs just had simple wires running to em
big loLoiza,Puerto Rico · Oct 30, 2010#3
I think fngravy has the same set up, if you have fogs installed it would be easy and the kit come with all wiring cool set up nice find
fnkngrvIn The Hotbox · Oct 30, 2010#4
I didn't have to cut anything. I did splice into my parking lights for the fogs however the rest plugs into the factory stalk. I spliced the switch into my 12v that is in my armrest. Not sure where yours would be on the LB tho.
advocateThread starterlocation · Oct 30, 2010#5
I'm not sure what you mean by 'factory stalk'.

There's two sets of wires on each fop lamp. I don't see any wiring near the fog light area of the bumper that I can possible splice into. Two of the four wires per lamp are extremely short.


Picture:
Picture lost · img338.imageshack.us


So I don't see where those two super short wires are going to tap into since I don't see any wiring that close to the fop lamp position. Also, I don't seem to be getting power to the main fog lamps with my old wire from the fuse box in the engine bay. I think the relay is interfering?


I have everything set up from a previous install of fog lights I just need to transplant this pair in.