I have been considering converting my car to a hydrogen system, not not some hokey ebay bullshit. but the problem is, they do not recommend using the system on an engine with a higher then 9.5 to 1 compression ratio. I have a 2007 Yaris, its all stock. So the engine has a 10.5 to 1 compression ratio. The issue is because hydrogen burns much faster then gas, which can cause predetonation at higher compression ratios. I am hoping that because the engine is aluminum instead of cast iron it may not have the issue as much? If not, any ideas as to what would be a good engine to swap it with that has a 9.5 to 1 ratio (or lower)?
Preliminary questions about engine conversion
6 posts · 2,917 views
Replies 5
wow...sounds like a hell of a project. I have no useful information for you, but I wanted to truly wish you best of luck...very cool.
swapping the engine sounds like it would cost a ton. You could also look at getting lower compression internals. Rods and pistons I believe.
You might be able to get a head spacer made to drop it enough, but I haven't seen anyone with one on a yaris, some of the boosted people might use one.
Yeah the boosted guys would know more. Sounds like a neat project!
Swap CP 9.5:1 pistons into it.
you won't need aftermarket rods unless you're going to make MORE than stock power.
you won't need aftermarket rods unless you're going to make MORE than stock power.