Well I got my turbo setup on my car aem fic is hooked up but I think I may have fucked up on the turbo car runs and is ok but I can't hear the turbo spool up it is a t3/t4 with a 55 trim compressor and a 58 trim turbine am I missing any thing or do I need a smaller turbo
Turbo setup
15 posts · 4,955 views
Replies 14
...More info?
If you messed up the FIC wiring, the car most likely wouldn't even start.
If you messed up the FIC wiring, the car most likely wouldn't even start.
When I use the jumper wire it works just fine spools and everything so there something I messed up but till I get back to pa and get the wiring redone and on the dyno I'm just going to try and stay put of boost :( but I'll keep y'all up to date if you wanna is my set go to my Facebook.com and look up my email drifter704@yahoo.com and add me as a friend and it well lost you see some pics
Just sent a friend request to you.
My name is Wes. Also sent you a pm!!!
My name is Wes. Also sent you a pm!!!
ok, i quit reading when i couldnt tell when one sentence ended and another begins. that was about 20 words into it and then i figured out i was wasting more time trying to determine where to stop reading a sentence and start a new one and then decided that it wasnt worth my time
good luck with life...hope you dont do this for your boss
good luck with life...hope you dont do this for your boss
This is my turbo setup
3 attachments not included in this copy
Did u build the kit yourself?
Where did you get the piping, etc?
Looks good bro!!!
Where did you get the piping, etc?
Looks good bro!!!
Got it all off ebay I know people hate on ebay but hey the have never let me do but
Yeah I did all the work on my own took about a week to get everything right
It was worth every min of it
Yeah I did all the work on my own took about a week to get everything right
It was worth every min of it
whered you get the manifold? Thats how essentially I want mine, but A. I do not want to cut the wiper cowl if thats what you did or B. it looks like a bitch to make a downpipe or get to ECU.
Igot it from eBay Right off hand I can't remember where when I can I'll post a link
I didn't have to cut the wiper cowl it sit about 2" down from it
The turbo I used made me have to move the ecru in the cabin along with my aem fic
For exhaust I had a shop make a custom 2 1/2" exhaust front to back so I really don't know how bad it was
And it really matters what turbo you get for how to make the down pipe mine is a v band turbo so I just bought the 90 degree v band down pipe and the shop worked from that
I didn't have to cut the wiper cowl it sit about 2" down from it
The turbo I used made me have to move the ecru in the cabin along with my aem fic
For exhaust I had a shop make a custom 2 1/2" exhaust front to back so I really don't know how bad it was
And it really matters what turbo you get for how to make the down pipe mine is a v band turbo so I just bought the 90 degree v band down pipe and the shop worked from that
03-06 SCION XB XA 1.5L CAST T25 TURBO EXHAUST MANIFOLD
That is the link for the manifold like my setup
That is the link for the manifold like my setup
Could have bought the manifold from Garm:) lol
Is ur turbo a 3 or 4 bolt?
AND can u still use AC?
Is ur turbo a 3 or 4 bolt?
AND can u still use AC?
It is a 4 bolt mani exhaust is a v band clamp with a t3/t4 turbo like mine no a t25 maybe idk
Do you still have A/C lines? I thought about getting that manafold and turbo set up, but I was worried about A/C line clearance. I decided to go with a bottom mount. Get some heat wrap for that hairdryer and it will keep things much cooler under the hood. O ya, and big props too 🎉
With the turbo I used I had to lose the ac