Yarisworld Archive

Caliper piston question

4 posts · 3,298 views

YaweshOriginal postlong island · Sep 12, 2010#1
So let's say the piston is sticking out, would C-clamping it back in with the brake reservoir cap off and many towels wrapped around the reservoir capless area it be ok?

Or it is required to remove the bleeder plug and hose?(thus, requiring the tedious task of bleeding brakes....).

Just worried that the bleeder plug acts as a primary 'gate' that if not released first while C-clamping would cause it to 'blow'

Thanks everyone!

Replies 3

MUSKOKA800Chatham, Ontario, Canada · Sep 13, 2010#2
C-clamp and rags has worked for many vehicles over the years. Can't imagine the Yaris being any different.
Don't open the bleeder unless your system needs air bleed out or fresh fluid is being installed.
YaweshThread starterlong island · Sep 13, 2010#3
thanks! by the way....the manual says to replace the dust boots and slide pin bushes.....is that realllly necessary? thanks again!
MUSKOKA800Chatham, Ontario, Canada · Sep 14, 2010#4
9 out of 10 brake jobs wouldn't include those parts. Of course a stealership may change them just to boost your invoice. Of course if they're cheap then why not just to keep everything fresh.