Yarisworld Archive

Automatic Choke Stuck

10 posts 路 10,845 views

RuaOriginal postIreland 路 Feb 7, 2007#1
I have an 2002 Automatic Vitz and it is reving high when starting. I believe the automatic choke is stuck in the on position. Can anyone tell me where the automatic choke is located and how to adjust it.馃槙

Replies 9

bugnutsBowling Green, Kentucky 路 Feb 7, 2007#2
Does the idle keep going up and down after it starts to warm up a bit? Toyota used a valve in the past on some of the vehicles that would cause this problem, It is linked into the cooling system.
swngBC 路 Feb 9, 2007#3
I believe that there is a good chance that the car's computer is, among its many functions, doing the duties of a choke. You may be experiencing a problem not related to a choke in the traditional sense.
Wish you can solve the problem soon!
pennystocksChicago, IL 路 Feb 9, 2007#4
Choke? I think those went out of style round the same time as billy idol 馃槻

Yea sounds like a computer problem, is the check engine light on? First thing i'd do is scan the comp for codes.
eTiMaGoBangkok, Thailand 路 Feb 9, 2007#5
It's normal for it to rev high at first, and gradually settle down, just part of the automated warming up process 馃檪
nick1983Winnipeg Manitoba 路 Feb 9, 2007#6
How do you scan codes? I want to know how.
pennystocksChicago, IL 路 Feb 10, 2007#7
How high is it revving?

You can buy a scangauge @ scangauge.com, awesome product or go a mechanic or something.
spkrman2 路 Feb 10, 2007#8
most mechanics charge you.

autozone and the like will scan for free :)
bob_cougarrhode island 路 Feb 20, 2007#9
That's what I like about about autozone as they give you a free scan. You can use the money you have saved for the services of mechanics in case you need one.

________________
Toyota 07 Yaris - Get the Toyota 07 Yaris Catalog by Toyota Motors
MooseCumming, GA 路 Feb 22, 2007#10
If there isn't a check engine light on, then a scan tool (like the ones at AutoZone) will not help you.

Besides, guys, I don't think there are any AutoZones in Ireland. 馃槅

If it doesn't go away after the vehicle is warm, then it sounds like an idle air control valve to me. I see them everyday. It may just need to be cleaned out- I'm not sure if yours is on top of or under the intake manifold- wherever it is, pull it out, spray carb cleaner through it until the carbon buildup is gone, and re-install. If the problem persists, contact your Toyota dealer. They, and only they, have a new computer (just released to dealerships) that can pull a history and health check- it pulls all codes and diagnostic information stored in your ECU. At that point they can make a determination as to what is wrong- even if there is not a check engine light on. 馃槑