Yarisworld Archive

FIC Wiring Help

4 posts · 3,910 views

Focus_Sh1ftOriginal postNew Jersey · Aug 11, 2010#1
Today I went to go wire my FIC up, but got kinda confused... This ECM pinout I'm using has got me all sort of confuzzled. Check it out here:
http://www.powerenterpriseusa.net/pr...risControl.pdf

Firstly, everything has two different wires listed and I have no idea what the acronyms stand for. So basically, I have no clue which wires I should be using to tap/intercept. It looks like some things are listed as + and -, while others aren't. Here's what I think needs to be done...

FIC Power - A21-1 or A21-2
FIC Gnd - C20-104
Injector 1 - C20-108
Injector 2 - C20-107
Injector 3 - C20-106
Injector 4 - C20-105
MAF+ - C20-118
MAF- - C20-116

Replies 3

CTScottUSA, CT · Aug 11, 2010#2
Conn A21.jpg
Conn C20.jpg

Connectors A21 and C20 are the two ECM connectors. The drawings above are looking into the connectors with them removed from the ECM.

What's listed is Function, Connector-Pin
The MAF also has polarity listed +/-

FIC Power - A21-1 or A21-2
FIC Gnd - C20-104
Injector 1 - C20-108
Injector 2 - C20-107
Injector 3 - C20-106
Injector 4 - C20-105
MAF+ - C20-118
MAF- - C20-116
Focus_Sh1ftThread starterNew Jersey · Aug 11, 2010#3
🙇

This is what I figured. So I was actually correct?? 😁

Two things I don't understand then. What's the difference between +B and +B2 on the power source? And is E01 (C20-45) (injectors) kind of like the ground for all four injectors?
CTScottUSA, CT · Aug 12, 2010#4
There's no difference between +B and +B2 (the two pins are connected together inside the ECM). E01 is the common for the injectors.