Yarisworld Archive

All Thai Yaris with NST pulley, pls read...

11 posts · 5,545 views

evo165Original post*tIny dOts iN AsiA* · Jun 29, 2010#1
Hi to all, can anyone Thai made Yaris mount on the water pump & alternator pulley without any problem? Are they the SAME OEM side pulley? All Thai Yaris with this mod, PLEASE advise & confirm...

Replies 10

cali yarisCanoga Park, CA · Jun 29, 2010#2
One of the three pulleys requires a shim, I believe it is the water pump.

[edit] it's the alternator pulley, see below
Red HorseCosta mesa, California · Jun 29, 2010#3
A shim on water pump? Do we need that on usmd yaris
eTiMaGoBangkok, Thailand · Jun 29, 2010#4
it is the alternator pulley, the design is a little bit different, you can install it, but you need to put in a spacer to align it properly. you should contact the member MANSETH here, he has done it.
cali yarisCanoga Park, CA · Jun 29, 2010#5
nothing needed on USDM cars.
evo165Thread starter*tIny dOts iN AsiA* · Jun 29, 2010#6
Thanks to all who reply. 🙂 Bro eTiMaGo, i remember reading up your old post that the alternator pulley doesn't fit into our thai yaris. But do you still mount it with additional spacer as mentioned? thank you.😉
SchizopreniaSurabaya, Indonesia · Jun 30, 2010#7
hello, i just wanna share my experience..

i bought my pulley from a supporting vendor here, MICRO IMAGE, after i scour the forums i decided to put up only the 2, underdriven crank + water pump. so alternator pulley not changed. works fine for me, and i believe a change in the alternator pulley doesnt generate much/any power one can feel... if not for the viewing pleasure...

mine's a thai built yaris in indonesia. hope it helps.
evo165Thread starter*tIny dOts iN AsiA* · Jun 30, 2010#8
Thanks Schizoprenia for sharing. 😉 I pm MANSETH regarding this. He managed to put on all 3 pulleys at one go. Only the alternator pulley require some shim/spacer to alight the belt.

Since you have the alternator pulley, why not try it with some shim/spacer? 🙂
moh-6.304976,106.765952 · Jul 3, 2010#9
I have thai built Vios, I just bought NST underdrive set (Crank, WP, Alt) from MI last week, and still in shipping ..

what kind of shim/spacer should i use, so all pulleys can be installed?
maybe anyone have pictures?

Thanks,
MANSETHBANGKOK · Jul 6, 2010#10
Guys,

Sorry, for late pictures. I spend sometime to find the NST because I already put on the supercharger.

This is Metal lathe. The reason I use metal because I experienced aluminum slip.
Picture not included in this copy

For thickness, I suggest you guys to measure the differences of the stock one and NST in order to get the straight between alternator and water pump.
Picture not included in this copy
By kavintyaris at 2010-07-06
VanquisherSingapore · Aug 15, 2010#11
Shouldn't be a problem fir vios in singapore den cos it's thailand made.

Shall order thru MI soon 🙂