Yarisworld Archive

when to replace rear drum brakes

7 posts · 11,563 views

bankrobberOriginal postCentral Florida · Jun 5, 2010#1
Have 90,000 miles probably half are interstate miles. So I bought new shoes at Peb Boys and the new ones look close to thickness of old ones. I know to replace at 1/16 inch. The new shoes are same thickness as two quarters and old ones are slightly lower than two quarters. Can I run shoes down to one quarter's width?

Replies 6

Yaris HiltonBristol, Tennessee, USA · Jun 5, 2010#2
Yes, as long as any rivets aren't yet touching. Conventional wisdom is at least 1/32" clearance for rivets. You've probably got bonded linings, I haven't looked at mine.
bankrobberThread starterCentral Florida · Jun 5, 2010#3
I never done drum brakes so when I first saw how thin they were I thought had to replace them. The new ones look like about 3/16 of an inch. I probably have 1/8 left
So I just sprayed everything down with brake cleaner. I was getting a short squeak sound when applying brakes.
Yaris HiltonBristol, Tennessee, USA · Jun 5, 2010#4
Usually means some sort of contamination or rust.
UTVitzSalt Lake City · Jun 5, 2010#5
A rule of thumb I was given by a mechanic-if the parking brake is working good and holds the car then the drums are fine. I've stuck to this theory and never had a problem even on an old wrangler with over 130k on it's rear drums.
Yaris HiltonBristol, Tennessee, USA · Jun 5, 2010#6
That's certainly true. But when the parking brake gets loose it doesn't necessarily mean you need the rear brakes redone, you may just need to tighten up the cable a bit.
Black YarisToledo, OH · Jun 5, 2010#7
keep rollin on the stock shoes, sounds like you got plenty of meat left