Yarisworld Archive

tweeters in door

11 posts · 3,890 views

centrysisOriginal postohio · Jun 2, 2010#1
I've been running polk components in the back of my 08 HB. I finally got the other pair for the front. I've seen people mount the tweeters at the top of the door. After trying different places, they did sound good there. Pulling wire through the boot in the door was a pain until I greased up the wire puller.
Picture not included in this copy
After mounting the mids, which actually cleared the window with fatmat behind the speaker bracket, and mounting the crossovers behind the glovebox,
Picture not included in this copy
I drilled the holes for the tweeters
Picture not included in this copy
The panel under it looked like this when I started
Picture not included in this copy

and this when I got done modifying it
Picture not included in this copy
I mounted the brackets for the tweeters
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
and put everything back together
Picture not included in this copy
They do sound good here, and they're protected a little from the rain if the window is down. Next step will be to deaden the doors when I can get more mat and then a custom box in the back. Right now I'm running two 12" sony's that are about 6 years old. Sorry for the crappy photos. I had to use my phone.

Replies 10

djct_wattThailand · Jun 2, 2010#2
It's not when you open your window that you have to worry, it's when you open your door. If you get heavy rainfall, they will probably see damage. With they amount of rain I see in out here in Thailand, that area gets SOAKED, just from briefly opening the door. I have no idea about Ohio though. . .
HerbicidalRoseville, CA - USA. · Jun 3, 2010#3
Nicely done! Nothing like a little lube! 😁
pennyracergrants pass · Jun 3, 2010#4
[IMG]Picture not included in this copy[/IMG]

[IMG]Picture not included in this copy[/IMG]
centrysisThread starterohio · Jun 3, 2010#5
I like your setup alot, but I'm not that talented Pennyracer.🙂
pennyracergrants pass · Jun 3, 2010#6
thank you thats only part of my system those are focal 3 ways in my doors :) [IMG]Picture not included in this copy[/IMG]

[IMG]Picture not included in this copy[/IMG]
suckerfaceMilwaukee, WI · Jun 3, 2010#7
Both jobs look fantastic.

@pennyracer: how'd you do those mouldings for the doors?
pennyracergrants pass · Jun 4, 2010#8
they are hand made
IsLNdbOiLas Vegas, NV · Jun 4, 2010#9
Wow. Good job hijacking the thread with your beautiful work. 😛

Now, can you make those door pods for other LB owners? 😉
centrysisThread starterohio · Jun 4, 2010#10
I do want to get two subs mounted in the back like that. I might be able to do that. My box I have now takes up the whole hatch area.
pennyracergrants pass · Jun 4, 2010#11
ya most people go the route not me i need all the room i can i can bounce around a case of water when i crank it up so no problem with running the cover on it plenty of base i am willing to sell this setup if someone wants it ? i built it to be taking out without any problems plug and play my sub floor is i want to build a sub floor with 4 tens this time in the very same style i have let me know if you interested ? keep up the good work [IMG]Picture not included in this copy[/IMG]