Yarisworld Archive

push to start engine button DIY (done)

7 posts 路 6,864 views

yarismoOriginal postalgeria 路 Mar 30, 2010#1
finally, I realised my DIY (start engine button).

馃憤 Here are pictures

the button with two wires
SDC10213.jpg

remove the panel
SDC10209.jpg

drill a hole that fits your button
SDC10206.jpg

place the button and put some glue around it
SDC10217.jpg

should looks like this
SDC10214.jpg

the panel + button in place
SDC10220.jpg

general view
SDC10226.jpg

Replies 6

YarisSedanCalifornia - Bay Area 路 Mar 30, 2010#2
Unfortunately none of your pictuers work they show up as little boxes with a red x
custom LftbackHouston, TX 路 Mar 30, 2010#3
^ +1
zachrybolesFt. Worth, Tx 路 Mar 30, 2010#4
yah your wiring looks crossed.... only 2 red wires on a protoboard?馃槢
firebobon the road 路 Mar 30, 2010#5
I got the point the first time I saw each pic.
Reeves360Olympia, WA 路 Mar 31, 2010#6
Pictures are great but where is the rest of the DIY?

I thought you would have included what wires you are hooking into.

Looks GREAT!

I think this would look a bit better with the OEM button or the TRD one.
yarismoThread starteralgeria 路 Mar 31, 2010#7
Sans titre.JPG

sorry but this kind of button is all what I found.