Yarisworld Archive

Blitz S/C a rebuilt and rebaged Toyota S/C?

4 posts · 8,574 views

Yaris0609Original postTucson, AZ · Mar 12, 2010#1
I picked up an SC14 from a toyota Previa, and when looking at the Blitz S/C kits on member's Yarii, I noticed some similarities between the two.
Picture not included in this copy
This first picture tells it all. It looks like Blitz removed the pulley, made an extension with bearings, and cast a new intake manifold that bolts directly to the output of the supercharger.

The SC12 and the SC14 are both roots type blowers. Check this thread....
http://www.microimageonline.com/foru...win-screw.html
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

After seeing this last picture, I am betting its an SC14. 6 bolt intake pipe, 5 bolt (in rectangle shape) boost pipe.

So those of you with a Blitz S/C kit are really rocking Toyota Parts!!

Specs: Stock MR2 with SC12 1.6L 143Hp 140 FT LBs 8.1 C/R
Previa S/C with SC14 2.4L 158Hp 190 Ft lbs 8.9 C/R

I will partially dismantle my SC14 and take pics here shortly.

Replies 3

Yaris0609Thread starterTucson, AZ · Mar 12, 2010#2
its close but no cigar.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

they might have modified the casting to have 6 bolt on top and 6 bolt on bottom. the previa intake tube has a bypass in it, and that is why it is 5 bolts. the tube goes over the s/c. the ecu controls the activation of the S/C in a similar way the 2zzge ecu controls lift, based on throttle position and engine load.

If i had a junked blitz im sure i could get it to work on a yaris with the s/c14.

Heres some measurement pics
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
blacksandiegovitzJust chillin' out brah ! · Mar 12, 2010#3
Interesting reserch and good pictures too , So what are your plans with this ???
Yaris0609Thread starterTucson, AZ · Mar 13, 2010#4
well nothing really. I can't afford nor justify the means of a $3500 s/c kit. Plus I am absolutely obsessed with only putting Toyota parts on my Yaris.

There might be people wondering what kind of S/C this is, or you might find a trashed s/c, and be able to replace it with an SC14, or you could make your own kit. I paid 60 bucks for this out of the junkyard, and its in pretty decent shape. with a little fab work and a belt, this could be an easy diy, you would just need a fuel controller and clutch controller, and obviously a smaller pulley...