Yarisworld Archive

NEED HELP

9 posts · 2,590 views

MIGUELLOUREIROOriginal postPortugal, Esposende · Mar 12, 2010#1
NEED HELP WITH HOW TO REMOVE THOSE GREY PLASTICS ON THE YARIS STEERING WHEEL, CAN I TAKE THEM OF?

Replies 8

KSIbuckyFond du Lac, WI · Mar 14, 2010#2
Be more specific
TEHxFALLEN V1.2Calabasas, CA · Mar 14, 2010#3
Look below the steering wheel for holes to access the screws.
MIGUELLOUREIROThread starterPortugal, Esposende · Mar 14, 2010#4
I only found one hole behind the wheel but no screw in it. I wanted to wrap those grey parts in vinil, and it would be easier to wrap them if i could take them of... Anyone did this?🆘

1 attachment not included in this copy

TEHxFALLEN V1.2Calabasas, CA · Mar 14, 2010#5
Well, if you're talking about completely wrapping the steering wheel, I'm sure many people on here would advise that you disconnect your battery first to avoid any possible injury in the event that the airbag goes off.
MIGUELLOUREIROThread starterPortugal, Esposende · Mar 14, 2010#6
Not hole wheel, just those grey plastics. one of them has the radio controls.
CTScottUSA, CT · Mar 14, 2010#7
You have to remove the airbag/horn to get at the screws. The airbag is mounted with two torx screws that are on recessed on the lower part of the sides of the rear cover. Disconnect the battery first.

Once the airbag is off, there is one screw that attaches each of the two metallic grey plastic parts to the steering wheel frame.
1NZYaris1New Zealand · Mar 14, 2010#8
Heres the steering wheel removal pdf have a read 👍

1 attachment not included in this copy

MIGUELLOUREIROThread starterPortugal, Esposende · Mar 15, 2010#9
Thanks for the replys, but that may be a bit complicated for me to do, i think i,ll try to wrap those without taking them of. but thanks very much it was very helpfull