Yarisworld Archive

NST Crank Pulley Reliability?

60 posts · 21,599 views · page 2 of 2

Replies continued

MiniTRDSacramento, California · Feb 9, 2010#51
Just saw this thread -

just a question for the OP

do you only get Toyota branded parts, fluids, etc?

because I'm certain that not all oil manufacturers have tested a yaris at different mileage. so by using your logic, their statements about engine protection might be false. . .

you can apply the same logic to any sort of part or fluid that isn't a Toyota product. . .

so what's the point about continuing to badger NST on a public forum? a lot of your questions were better suited to a PM instead of creating a soapbox here. I mean most people call the company directly instead of getting them to respond to a forum on a specific car

just my thoughts and I'll shut up now
bzinn 1University Place,WA · Feb 9, 2010#52
30000 miles with them on my Scion and never a problem car has IHPE....best mod was the pulleys it really cleaned up the of the line acceleration........There are guys running them on their xBs and xAs on scionlife for over 100000 miles and no problems,same motor we got short of throttle body.......the thread on scionlife is well over 70 pages of discussion and hundreds of owners with the very same thing to report.........no problems.

One thing no one has considered is how long the rubber dampner on a stock pully that is 2mm thick will last .......pop one off a motor with 50000 miles on it and it is starting to wear out.....

Once the dampner wears it does nothing for the crank or bearings to reduce harmonics.

Toyota over built every motor since day one to do one thing and do it well.......last for a longer time than any of the compitition......

NST has built a great product and it works and that is a fact.........will the motor last a shorter time........possible yes.......but how long was it going to last to begin with depends on how it is used,how it is maintained,and many more factors.
AltitudeColorado · Feb 9, 2010#53
Originally Posted by camelll ↑
I have only stated that it can.
My car can explode given the right circumstances, but that doesn't stop me from taking the risk of driving it.

I'm having a hard time understanding your argument when you have a supercharger on your engine. You implied that the reason you installed it - despite the known risks - is because the manufacture freely admits (or at least doesn't dispute) it may cause a problem. Your main point of contention for not installing the pulley is that NST hasn't publicly stated it may cause a problem - or maybe it's that when asked they reply "empirical evidence shows the pulleys to be a high quality product and we have little or no complaints." Either way, you need to find a better excuse.

There are plenty of people that think installing an SC on the Yaris isn't worth the risk (myself included) yet you don't see any of us bitching at the manufacturers or those that have them installed.

If you don't want to install the pulley because you think it's bad for your engine then don't do it and just leave it at that.
AstromanWenatchee, WA · Feb 9, 2010#54
+1
cali yarisCanoga Park, CA · Feb 9, 2010#55
Do you think our engines were built using the specs of a balanced engine?
You already know that there is no concrete definition of that. There is quite a bit more balancing that can be done with this motor. I know, I've done some of it.

So, you continue to argue from points you know aren't solid. It's a vapor argument, and by this point everyone on this thread can see it. This is my last post on it, and of course.... you may have the last word. 🙂
*MAD DOG*Victoria, Australia · Feb 10, 2010#56
Just about to click "unsubscribe" from this thread. I'd rather put a gun in my mouth and paint the walls with my brains then continue to read this drivel.
o2cavyssTexas · Feb 10, 2010#57
While I don't agree with how Camelll has continued with all this, I have to agree that his questions to NST are not unreasonable. But even if the answers aren't what you'd want from someone building parts for cars, at this point there is more than enough proof that these are quality products. And, to be fair, anyone modifying there car should understand that they are making changes to the plan that Toyota engineers planned and tested to meet whatever needs they had (cheap and reliable) in order to make them the most profit. ANY mods will inherently have an impact on the car's reliability, and in almost all cases adding power increases stress loads on the engine/drivetrain and lessens the life of all affected components. ANYONE modding a car assumes that risk.
TatshRichmond, BC · Feb 10, 2010#58
Hell, a few members who installed the blitz supercharger started running extremely lean in F/A mixture in another thread, I'd say that's more of a concern than running a pulley, why are you so obsessed with proving that running the NST pully will damage the car?
thebarberGrand Rapids, MI · Feb 10, 2010#59
i would think that 99.9% of people who use an NST pulley will sell their car WELL before they run into trouble due to an undampened pulley (regardless of whether it does any harm to the engine)....just my 2c
YodaFL · Feb 10, 2010#60
I will NEVA SELL my BABY.... I LOVE MY TONYA