Replies continued
o2cavyssThread starterTexas · Mar 31, 2010#51both sides like this
Picture not included in this copy
_S7V7N_South Texas · Mar 31, 2010#52Yep the shield seems to be very thin, mine looked the exact same way. I may end up throwing some of that wire loom stuff on them just to be sure they're protected. Glad the problem shooting was a success. The induced noise may be from your rca's, are they brand new ? How close to the power did you run them ? If not check the ground on your amp and make sure there's no ground loop. It's all on troubleshooting bro, it's usually very simple fixes.
o2cavyssThread starterTexas · Apr 5, 2010#53The rca's are brand new and this is as close as they get to the power wire
Picture not included in this copy
power wire goes from there, under the seat, to the front of the car and rca's go under the mat in the trunk to the left rear corner of the trunk here
Picture not included in this copy
Im getting two noises, a whistling/whining sound that increases as the rpms increase (probably has to do with the crossovers being to close to the front of the car), and a static that is constant regardless of volume level or engine speed (likely some sort of ground loop, idk).
_S7V7N_South Texas · Apr 5, 2010#54Maybe some sort of Induced noise from the seats. The back of the seats are metal and your screws drill through them which are touching the amp. That's why they usually tell you to mount your amp to wood. I would start there first see if the Hissing stops. As far as the whining, I'd check your grounds, did you scrape off the paint off all the ground points ? And do you have more than one ground tied to a certain point ?