cali yarisOriginal postCanoga Park, CA · Jan 5, 2010#1I'm changing out my rear bumper. This means I have to (1) modify the new bumper for my center-exit exhaust (more work and more money I don't have right now) or (2) modify the exhaust back over to the right-side exit (stock position).
What say you?
Replies 20
Kaotic LazagnaCentral Valley, CA · Jan 5, 2010#2Which rear bumper are you getting? If there is no pre-cut out on the right side, I'd say stick with the center-exit (I might be bias, lol), and cut out the middle yourself. If there's a pre-cut out already, then you can always cut out the driver-side and do and dual tip (smaller tips, not those huge tips).
KCALB SIRAYVirginia · Jan 5, 2010#3which do you like? I like the center exit and does it have to be done now? I'd say hold off and save for the mod to the bumper.
1NZYaris1New Zealand · Jan 5, 2010#4Sell the bumper ,😁
and get one that suit the centre exit .
or keep the rear bumper and put on the rear skirt i want 👍
cali yarisThread starterCanoga Park, CA · Jan 5, 2010#5yeah the problem is that all the aftermarket bumpers have a pre-cut hole on the right side. So not only does that have to be covered, a new hole has to be fabricated and finished for the center exhaust.
Ray, the lip you're talking about is some custom work, which I'm trying to minimize if possible.
I'll probably just move the exhaust for now, depends on downtime and cost. keep the votes coming, what people think does make a difference.
TEHxFALLEN V1.2Calabasas, CA · Jan 5, 2010#6Hey Garm, just go for this look!
Picture not included in this copy
Weight savings ftw!!!
JerkrattFair Lawn, NJ · Jan 5, 2010#7cone sells a cap off for there bumpers.... that covers the right side exhaust exit
advocatelocation · Jan 5, 2010#8I gotta say I'm a fan of one-sided exhausts.
yaris2010RSAngus, Ontario · Jan 5, 2010#9naw man, all about under the drivers and passenger door exhausts, that is the shit, lol
on a realistic note i personally like dual tip for normal applications but center if its built into the bumper. kinda like acura built in the dual tip into the corners, looks sick!!
Kaotic LazagnaCentral Valley, CA · Jan 7, 2010#10Here you go, Garm:
Picture not included in this copy
😁 😛
Kaotic LazagnaCentral Valley, CA · Jan 7, 2010#11On a more serious note, how about something like this (picture it without the rear lip):
Picture not included in this copy
yaris2010RSAngus, Ontario · Jan 7, 2010#12yes man, put that on a fucking yaris
you will be GOD!!
🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇🙇🙇🙇🙇🙇🙇🙇 🙇🙇🙇
yaris2010RSAngus, Ontario · Jan 7, 2010#13okay man, chill, lol, i was replying that to the first pic, its all about the first pic man, lol
but yes, on a realistic note second pic is nice. dont do a center exhaust like BMW did in the older 80's cars. that was awkward looking..... it was litterally some random pipe sticking out about 2 inches below the rear bumper (and usually not in the center)
Kaotic LazagnaCentral Valley, CA · Jan 7, 2010#14LOL. Figured you were referring to the LFA exhaust.
But yeah, Garm and I both have center-exit exhaust right now. Both look good. As for the BMW 2002, not sure what they were thinking when they made it a center, but not so center-exit. LOL
toyoJapan I wish · Jan 7, 2010#15center FTW
DerFlosserUSA · Jan 19, 2010#16I really like center exit exhaust. It would be awesome if there was a nice system for the yaris (Maybe Garm can take on yet ANOTHER project!). 😁
Red HorseCosta mesa, California · Jan 19, 2010#17Very noticiable center exit exhaust
1 attachment not included in this copy
cali yarisThread starterCanoga Park, CA · Jan 19, 2010#18holy rear end, Batman.
Thanks everyone for the valuable input.
I am going with right side exhaust, for now. 3" downpipe-back, with a Vibrant muffler.
Kaotic LazagnaCentral Valley, CA · Jan 19, 2010#19Nice subtle tip?
cali yarisThread starterCanoga Park, CA · Jan 19, 2010#20yep, the Vibrant exhaust comes with a 3" black tip.
Picture not included in this copy
WalterSimi Valley, CA. · Jan 23, 2010#21I say if youre getting the rear bumper painted anyways, have the bodyshop modify it prior to painting and keep your center exit. Shouldnt cost much more (probably less than getting a new exhaust). Any competent bodyman can cut out the section of the bumper with the cutout, the center section of the bumper, and swap them out grafted perfectly while keeping the factory lines of the bumper youre using... whether its fiberglass (easier) or plastic.