Yarisworld Archive

need advice

6 posts 路 3,185 views

frodosOriginal postPaanama 路 Dec 28, 2009#1
back in may i had an accident i will post the pics latter the car hit me between the front bumper and my door they replace the fender, Lower cntrl arm, Knuckle the shock and the Axle 6 months latter the axle broke( the part that goes inside of the wheel and no body have any idea about how that happened) now my concern is that maybe something is still damaged inside of the car and it damage the part again or it was just a bad part or i did something that damage that part i don't know what to think 馃檨

Replies 5

JBIZZFort Lauderdale, FL 路 Dec 28, 2009#2
Where on the axle did it break? Did you have any abnormal vibrations after the initial repairs?
1NZYaris1New Zealand 路 Dec 28, 2009#3
sounds to like they heated and straightened it rather than replaceing it 馃憦
thats why it broke on you .
YarisSedanCalifornia - Bay Area 路 Dec 28, 2009#4
your talking about the CV joint? probally was damaged during the accident. It has bearings inside. Since there is a boot that covers it they probally couldnt see any damage. So the damage was done and it didnt have complete failure for months later.

Were all the parts new? Sometimes the knuckle comes with a new axle too. Thats usually how they come from the junk yard. Lot of insurance companies require body shops to use used or reconditioned parts now days. So that could be why it failed as well. Its hard to say. Id say its safe to say though once its replaced you shouldnt have any further issues.
frodosThread starterPaanama 路 Dec 29, 2009#5
Picture lost 路 photos-a.ak.fbcdn.netPicture lost 路 photos-h.ak.fbcdn.net

those are from the accident and this are from the part 6 months after the crash


Picture lost 路 photos-g.ak.fbcdn.netPicture lost 路 photos-h.ak.fbcdn.netPicture lost 路 photos-b.ak.fbcdn.net
SidicasNY 路 Dec 29, 2009#6
Aw man, that sucks..
I just saw your pics before the crash when I was just browsing around the forums..


sample: thread 51

How did the accident happen?