Yarisworld Archive

BEWARE! Emanage Plug n Play harness

6 posts · 5,007 views

1nzOriginal postBrunei · Nov 8, 2009#1
Picture not included in this copy
For those who plans to install and Emanage ultimate w/ Plug and Play harness be sure to make a cover or seal the socket that goes to the ECU because during heavy rain or when you hit a puddle of water, some splach or evaporated water will go into the socket and into the ECU where the water accumulates.

I learned this the hard way and hopefuly my ECU can be repaired or B$3K+ for a new ECU.

Replies 5

MistryWhere Only Yaris' Can Go · Nov 8, 2009#2
Ouch! Thanks for the advice.
chongopantsHouston · Nov 8, 2009#3
just fill it all with RTV solicone... easy to remove and makes a good seal.
changchewsoonMalaysia · Nov 8, 2009#4
😲 ouch, sorry to hear that man bro 1nz
Nexus1155Dorchester · Nov 9, 2009#5
yeah man sorry to hear that, but you should know to think the worst of everything before hand!
battleversiontc808 · Nov 10, 2009#6
thank god i dont have to worry about that i as i re routed all my wiring and ecu into the car