Yarisworld Archive

Need help with TEIN S-tech

6 posts · 2,598 views

Sebastian18Original postPeru · Oct 20, 2009#1
Iam planning to install a set of TEIN's S-Tech on my 2009 Yaris sedan but I don't know if Iam going to have rubbing problems with my 205/50/16 tires,(offset 42,american racing Haze rims)...should I have to go down to 205/45/16 tires??I live in Peru so the roads are not that good.

Thanks, all ideas are welcome

Sebastian

Replies 5

SilverBackEl Monte, Ca · Oct 20, 2009#2
You should be fine as long as you drive slower with that setup.

It would also help if you did a strut upgrade to minimize the bouncing, which should eliminate what's left of the rubbing issue.
coffiendOmaha, NE · Oct 20, 2009#3
If it is of any help, I'm on s techs and stock 15s w/ stock tires and stock shocks and I have only rubbed on the liner once or twice very lightly at like 50 mph on a big sharp dip.

Idk how much this really helps you but just thought I'd share my experience....
advocatelocation · Oct 21, 2009#4
I use the Tanabe DF210 lowering springs on 205/50/16 and I rub usually while pulling u-turns at low speeds.
Sebastian18Thread starterPeru · Oct 28, 2009#5
After the advice probably I should go to down to 45´s to avoid rubbing issues...thanks for the help
Vitz RangaaaHFloowwda · Nov 4, 2009#6
I'm running on 205/45/17. You will be fine. Other then the obvious speed bumps, sharp dips no problems here.