anyone have the ecu diagram for an 07 yaris hatch? searched, but can't find it...
ECU Wiring Diagram?
14 posts · 38,235 views
Replies 13
Closest I have seen is in section 5 of the EWD.PDF file part of the service manual. I downloaded from a thread here.
Here's a chart that I put together. The connector pinouts are at the end of the EWD. I went through the EWDs to figure out every used pin on the two connectors.
In case you are wondering about the highlighting - They are the pins needed to fire up and ECM on the bench. The ones highlighted in red are the ones that need +12V and the yellows are the ones that need to be grounded.
Yaris ECM.pdf
In case you are wondering about the highlighting - They are the pins needed to fire up and ECM on the bench. The ones highlighted in red are the ones that need +12V and the yellows are the ones that need to be grounded.
Yaris ECM.pdf
wow, very nice!!
Well done CTScott!
Much 🙌
Much 🙌
^^
Goo luck finding that. Ouch.....
Goo luck finding that. Ouch.....
I think I have everything that you need. PM me your email address and I'll email you the pdf's.Originally Posted by miketrd ↑Hellow all
I bought an 1nz-fet - NCP13 Vitz TRD engine with turbo from yahoo jpctrade auction.
By trying to put the motor on my car we found the following problem: The 2 sockets with wire from ecu to car speedometer are missing. I attach a photograph (111.jpg) to show the missing sockets.
So we found 2 sockets which match but we haven't the terminals of ecm (ecu pinout - wiring diagram) to construct the cables.
In addition to the above my car is Toyota Yaris TS 1.5- NCP13 2002 and the vitz trd engine is from a vitz rs turbo 2003 model (facelift). So the 2 harnesses are different.
I want to ask you someone have the pinout diagram for this or where could i find it?
Thanks in advance
CT just has every wring scheme imaginable!!!
You keep on surprising me:)
You keep on surprising me:)
HI MAte,
I have the same problem also, would you please forward pdf diagram also?
Thank for your help.
BR.
Kaws
I have the same problem also, would you please forward pdf diagram also?
Thank for your help.
BR.
Kaws
does anyone have the diagram?
Could tell me where i can find it
Just build a yaris TS with turbo and need the pinout diagram for the ECU vitz turbo (1nz-fet - NCP13 Vitz TRD)
thanks
Could tell me where i can find it
Just build a yaris TS with turbo and need the pinout diagram for the ECU vitz turbo (1nz-fet - NCP13 Vitz TRD)
thanks
I’m in need of the diagram for the 1NZ-FET trd Turbo ecu if anybody would be so kind as to share it :)
In need of the diagram for the 1nz turbo also can someone help if anyone is still out there?
Anybody knows which programmer use to program a 2023 yaris with a M [4A] blade key I'm need make replacement key