Yarisworld Archive

brakes

20 posts 路 4,449 views

bribriOriginal postBarrie, Ontario, Canada 路 Sep 10, 2009#1
I'm getting brake fade at the track. I'm using oem disc and pads.Where can I find pads which will tollerate higher heat. I don't mind switching pads for track use but I can't cant find track specific pads for a 2007 yaris. Any help would be appreciated>
Brian

Replies 19

lilredrocketDFW, Texas 路 Sep 10, 2009#3
Or put in cooling ducts
AlexNet0Rockland, ME 路 Sep 10, 2009#4
that too, look up the DIY on brake ducting. lol
cali yarisCanoga Park, CA 路 Sep 11, 2009#5
and fluid, and lines. If you're cooking your fluid you'll get fade that way too.
LorenSafety Harbor, FL 路 Sep 11, 2009#6
All of that, and, of course... better tires, suspension setup and skills so that you can corner faster and BRAKE LESS.
bribriThread starterBarrie, Ontario, Canada 路 Sep 11, 2009#7
what is the difference betwen dot 3,dot 4 an dot 5 brake fluid?
LorenSafety Harbor, FL 路 Sep 11, 2009#8
Google is your friend.

Mainly, the difference is in the temperature spec. Dot 5 is silicone based and has some other benefits (and some potential pitfalls depending on what you want to use it in).

For racing, get a good high-temp DOT 3/4 like Motul or ATE. Pay close attention to the actual brake fluid spec, not just the DOT spec. The DOT spec is just a minimum that must be met, so you can have "streetable" DOT 3 that isn't nearly as temperature tolerant as "race" DOT 3.
bribriThread starterBarrie, Ontario, Canada 路 Sep 14, 2009#9
after a bit of research I've decided to change the brake fluid, clean and lubethe front brake and bleed bleed bleed.I'll wait for the roter to wear before i change pads.
cali yarisCanoga Park, CA 路 Sep 14, 2009#10
AMSOIL is another good DOT4 brake fluid.

www.trulube.com (lazerdot is the dealer, he's a member on here)
markitectMichigan 路 Sep 14, 2009#11
if the pedal is still firm, and it is just not braking as hard as it should, then you don't need fluid or lines, just pads.

If your pedal suddenly gets soft then go for the fluid.
LorenSafety Harbor, FL 路 Sep 14, 2009#12
There's no question that you need pads. The stock pads were never intended for track use and will fade VERY quickly. You need good higher-temp pads, and fluid that will hold up to the higher temp the pads will operate at.

Ducting helps A LOT, too.
JCS_IMPORT_25moscow 路 Sep 14, 2009#13
do any of you know where i can get a brake drum to disk conversion
ozmddDFW, TX 路 Sep 14, 2009#15
We need a predictive text-like feature that will just automatically forward users to www.microimageonline.com whenever they type "where can you find..."
TamagoOff Grid 路 Sep 14, 2009#16
brake fade at the track? wow
cali yarisCanoga Park, CA 路 Sep 14, 2009#17
We need a predictive text-like feature
LOL, nah there's other product sources too! "I don't sell brake fluid" -- so there. 馃檪
ozmddDFW, TX 路 Sep 14, 2009#18
I'll bet you would if there was a JDM variety...
arcticvitzStudio City, CA 路 Sep 15, 2009#19
I use Neo Synthetic and it feels absolutely amazing. Granted, it can be pricey but for brake fluid why cheap out? Here's a link to the fluid and the place I get it at for a discount http://www.upgrademotoring.com/perfo...uperdot610.htm
bribriThread starterBarrie, Ontario, Canada 路 Sep 17, 2009#20
My oem pads are pink with a fissure in one. they are four mos old and I thought it might be defective. Toyata said they were pink because they were over heated.The parts mgr was confused about when I bought them because the were 3/4 worn. They did the right thing and replaced them ,no charge. I'm waiting for my CarboTech brake pads xp8 from MicroImage.Oem pads and lapping dont work well, even for a stock Yaris.How do you clean and lube front brakes?