Yarisworld Archive

Dual cold cathode light installation

8 posts · 3,319 views

jaimicoOriginal postpty · Sep 5, 2009#1
I just got a dual cold cathode light (blue) to installed as the one toyota has under the dash, but I want to wire it to the car´s lights, any point that I could use?

Replies 7

CTScottUSA, CT · Sep 5, 2009#2
So it turns on with the interior lights or with the headlights?
jaimicoThread starterpty · Sep 5, 2009#3
the headlights, it has a independent switch, so i could turn on/off as I please.
CTScottUSA, CT · Sep 6, 2009#4
I would use the white wire in pin 13 of the headlight switch connector for +12V and the white with a black stripe wire in Pin 10 as your ground.

Picture not included in this copy

1 attachment not included in this copy

sqcompBack at home · Sep 7, 2009#5
Those are also great to use as rear plate lights. You see them on the Lexus GS models.
IsLNdbOiLas Vegas, NV · Sep 7, 2009#6
Been wondering if anyone has used a 4" cold cathode in place of the puny single bulb / LED for the rear plate...
sqcompBack at home · Sep 7, 2009#7
The dual 4" bulbs can be used I'd imagine. Most computer supply stores sell them with ballasts for under $10. Lexus sells one bulb for $95...
jaimicoThread starterpty · Sep 7, 2009#8
ok, thank guys, and yes they do come cheap if you buy them on a computer store.

I wolud like to get a red one too for the 3r brake light, and if you installed it a flasher, you can get the F1 car brake light look alike.