Yarisworld Archive

One filament in the headlamp bulb.

8 posts 路 5,511 views

ellenbettyOriginal postStow Ohio 路 Sep 5, 2009#1
Am I missing some detail about the Yaris headlamp bulb? On-line I was looking at different Yaris headlamp bulbs. The headlamp bulb is listed as 65/55W. But all I could see in the clear headlamp bulbs is just one filiment. 馃憥 It looks like the Yaris uses resistors and/or relays to create high beam, low beam and daytime running lights. If I am right, when the DRL burns out the filiament in the headlight bulb, you need to replace the headlamp bulb before dark (or have fog lamps as a backup plan) to avoid driving a one eyed monster.

Replies 7

RedRideMiddletown, NY 路 Sep 5, 2009#2
The yaris uses a 9003/H4 bulb with two filiments.

The DRL uses the low beam (at lower voltage) so, yeah if you loose a DR, replace the bulb ASAP.
goku87AK 路 Sep 5, 2009#3
one of my headlights looks sad. is this why? one of the filaments died?
IllusionXBrossard, QC 路 Sep 5, 2009#4
yeppers, you will not see the 2nd filament by looking through the headlight assembly.

Also, if one of your headlight look very DIM compared to the other, you could have a bad ground somewhere... check all your wiring.
Yaris HiltonBristol, Tennessee, USA 路 Sep 5, 2009#5
When a headlight does need replacing, it's best done in matching pairs. Replace one, and the two will probably not appear the same color and brightness.
RedRideMiddletown, NY 路 Sep 5, 2009#6
Also, once one goes, the other is living on borrowed time.
ellenbettyThread starterStow Ohio 路 Sep 6, 2009#7
Found this at Candle Power Inc. Diagram shows 2 filaments. Front filament for high beam. Rear filament for low beam. Not the best diagram.

1 attachment not included in this copy

RedRideMiddletown, NY 路 Sep 6, 2009#8
Interesting read. The PDF explains the "difference" between a 9003 and H4 and clears that up.