Yarisworld Archive

What is a good reccomended custom alignment setup for street

4 posts · 3,686 views

YarisSedanOriginal postCalifornia - Bay Area · Aug 19, 2009#1
So my suspention setup is as follows. TRD springs, TRD Swaybar. Megan racing front rear and mid lower tie bar set. Tannabe front strut bar and rear hub spacers 10mm. I keep my tire pressure set at 40 thats where i notice the least bodyroll and handling increase.

I am going to get a alignment next week since its been a year since i lowered the car and never had it done. I was wondering what would be reccomended to set the front toe to make the car a little more agreesive but without causing a lot of tire wear. I plan to see if ican be in the car when it is aligned to so it is calculating my weight.

Replies 3

AdeJong 03LA, CA · Aug 19, 2009#2
where are you located?

West End alignment near LA is the best place to go that I know of
Kaotic LazagnaCentral Valley, CA · Aug 19, 2009#3
Jason is located in NorCal.
TamagoOff Grid · Aug 19, 2009#4
recommended setup for street:
-1.0 to -1.5deg front camber
0 toe

and you can't align the rear without shims, so let it be