Yarisworld Archive

Cheapest / Easiest Way to add 1-2 inches in the rear?

7 posts · 3,137 views

The ArchitectOriginal postFL · Jul 29, 2009#1
To those of you who know far more about suspension etc than I do, My back end is once again riding a bit lower than Id like so what would be the easiest way to add an inch or two?

Replies 6

lilredrocketDFW, Texas · Jul 29, 2009#2
Get some spring supports from autozone or some other auto store.
TinyGiantRochester, NH · Jul 29, 2009#3
Cheapest / Easiest Way to add 1-2 inches in the rear?
donuts
The ArchitectThread starterFL · Jul 29, 2009#4
elaborate?
kacWest/Central Illinois · Jul 29, 2009#5
easy way? - take the sub out

otherwise, wait for more imput from people who know what they're talking about.
BrianRiverside, CA · Jul 29, 2009#6
You could always put airbags in the rear
botchilahPhilippines · Jul 30, 2009#7
I had a local shop make me 1.5' rubber cup spacers to raise the overall ride height of my car. Don't you have a shop that does that there?

FYI when I installed Tanabe NF210 springs sourced from a local JDM parts supplier, it said that the lowering would be mild, like 1.2' all around. Apparently, this was based on oem Yaris JDM spring height. When I installed it on my car, it got lower by almost 2.5 inches when I really just wanted 1' or so so I had rubber spring cup spacers made. Raised the overall ride height all around, got stiffer springs and still have lots of suspension travel :)